### All Publications

Total Publications = 133

1 | Obaid ur Rehman, Naveed Khan Baloch, Jawad Ali Khan, Waqar Amin, High Speed Sklansky Based Carry Select Adder, International Conference on Emerging Trends in Science and Technology, Pakistan, September 2016 (2016), pp. , |

2 | Sabahat Hameed, Rabia Shakeel, Bushra Arshad, Naveed Khan Baloch, Mukhtiar Bano, Emerging Trends and Technologies in E-Health Challenges, Framework design and Security issues, International Conference on Emerging Trends in Science and Technology, Pakistan, September 2016 (2016), pp. , |

3 | Abo Bakar, Naveed Khan Baloch, Jawad Ali Khan, Muhammad Iram Baig, High Performance and Connection-retaining Fault-Tolerant Routing Algorithm for NoC-based Many-Core Systems, Behria University Journal of Information and Communication Technologies, Vol. 8, No. 1, (2016), pp. 5 |

4 | Jawwad Latif, Naveed Khan Baloch, Sadia Azam, Hassan Nazeer Chaudhry, Design Trade off and Performance Analysis of Router Architectures in Network-on-Chip, The 10th International Conference on Future Networks and Communications (FNC 2015), France, June 2015 (2015), pp. , |

5 | Waqar Amin, Naveed Khan Baloch, Jawad Ali Khan, Muhammad Iram Baig, Fault Aware Dual-Layer Adaptive Error Control Technique for NOC, Smart Computing Review, Vol. 5, No. 3, (2015), pp. |

6 | Kamran Javed, Naveed Khan Baloch, Fawad Hussain, Iram Baig, Design and FPGA Implementation of compositional micro programmed FIR Filter, New Horizons, IEEEP, Vol. 81, (2014), pp. |

7 | Usman Hayat, Naveed Khan Baloch, Fawad Hussain, Asim Malik, Improved Dynamic Frame size with grouping slotted aloha, New Horizons, IEEEP, Vol. 81, (2014), pp. |

8 | Naveed Khan Baloch, Muhammad Haroon Yousaf, Waqar Ahmad, M. Iram Baig, Algorithm for Efficient Attendance Management: Face Recognition based approach, International Journal of Computer Science Issues, (2012), pp. |

9 | Nousheen Munir, Javeria Khan, Qurat-ul-ain, Naveed Khan Baloch, Fingerprint verification over the network and its application in attendance management, International Conference on Electronics and Information Engineering, , August 2011 pp. , |

10 | M. Latif and Ahmad K. Khan, 1. “Improvement of safe operating area of transistor”, Proceedings of the 30the Midwest Symposium on circuits and Analysis, (1988), pp. |

11 | U. Farooq, M. Shoiab Alam and Ahmad Khalil Khan,, 2. “An efficient algorithm to find Inverse Z-transform”, Journal of Engineering and Applied Sciences, Vol. 11, No. 1, (1992), pp. |

12 | Tameezuddin Aslam, Ahmad Khalil Khan,, 3. “Practical application of current converters in DC servomotors used as fed drives for machine tools”, Nucleus, pp. |

13 | M. Shoiab Alam and Ahmad Khalil Khan,, 4. “Calculation of Optimum Firing angles used for a Cycloconvertor for a minimum of harmonics using cosine wave crossing method”, Journal of Engg. & App. Sciences, Vol. 13, No. 1, (1994), pp. |

14 | Shahid H. Jaffri and Ahmad Khalil Khan., 5. “On line control of Cycloconvertor by PC”, Proceedings of JIASC, (1994), pp. |

15 | Shahid H. Jafry & Ahmad Khalil Khan,, Design of Personal computer “PC” based single phase to single phase Cycloconvertor”, Journal of Engg. & Applied Sciences, Vol. 13, No. 2, (1994), pp. |

16 | M. Shoiab Alam and Ahmad Khalil Khan,, 7. “Simulation of Single Phase to Single Phase Cycloconvertor Using PSPICE”,, Technical Research Journal of UET, Taxila., (1995), pp. |

17 | Ahmad Khalil Khan, S.A. Khan and Habibullah Jamal, 8. “FPGA based video object segmentation”, INMIC 2002, IEEE Int’l Multi-topic Conference, Karachi, pp. , |

18 | Fauz Sattar, Ahmad Khalil Khan and Habibullah Jamal., Modeling, design & implementation of an adaptive embedded codec for speech encryption systems”, INMIC 2002, IEEE Int’l Multitopic Conference,, Karachi, pp. , |

19 | Fauz Sattar, Ahmad Khalil Khan and Habibullah Jamal., 10. “A spread spectrum spatial steganographic processor core for textual information communication over streaming video”, Proceeding IEEE INMIC 2003, pp. |

20 | Irfan, Ahmad Khalil Khan and Habibullah Jamal, “FPGA Based Implementation of MPEG-2 Compression Algorithm”, ICM2005, pp. |

21 | M. Iqbal, M. I. Bhatti, M. Muddassar, Hadamard-type Inequalities for h-Convex functions, Pakistan Journal of Science, Vol. 63, No. 11, pp. 170-173 |

22 | Muhammad Muddassar, M. I. Bhatti, M. Iqbal, Some new Inequalities of the type of s-Hermite- Hadamard for Convex functions, Proceedings of the Pakistan Academy of Sciences, Vol. 49, No. 1, (2012), pp. 7-19 |

23 | Muhammad Muddassar & Muhammad Iqbal Bhatti, Some Generalizations of Hadamard's type inequalities through differentiability for s-Convex functions and their Applications, Indian Journal of Pure and Applied Mathematics., Vol. 44, No. 2, (2013), pp. 131-151 |

24 | Muhammad Muddassar, Muhammad Iqbal Bhatti and Wajeeha Irshad, Generalizations of Integral Inequalities of the type of Hermite-Hadamard through Convexity, Bulletin of the Australian Mathematical Society, Vol. 88, No. 2, (2013), pp. 320-330 |

25 | Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science Journal, Vol. 10, (2013), pp. 678-683 |

26 | Muhammad Iqbal, Muhammad Iqbal Bhatti and Muhammad Muddassar, Some new Integral Inequalities of the type of Hermite-Hadamard’s for the Mappings whose absolute values of their Derivative are Convex, Journal of Computational Analysis and Applications, Vol. 16, No. 4, pp. 643-653 |

27 | Qaiser Mushtaq, Nasir Siddiqui, The Action of G?² on PL(Fp), Quasigroups and Related Systems, Vol. 16, No. 2, (2008), pp. 221-228 |

28 | Qaiser Mushtaq, Nasir Siddiqui, Parametrization of actions of the automorphism subgroup of a cubic tree on PL(Fp), Communications in Algebra, Vol. 40, No. 6, (2012), pp. 2106-2114 |

29 | Masood Khan, Azeem Shahzad, On stagnation point flow of Sisko fluid towards a stretching sheet, Meccanica, Vol. 48, (2013), pp. 2391–2400 |

30 | Azeem shahzad, Masood khan, On axisymmetric flow of Sisko fluid over a radially stretching sheet, International Journal of Nonlinear Mechanics,, Vol. 47, (2012), pp. 999-1007 |

31 | Azeem shahzad, Masood Khan, Falkner-Skan boundary layer flow of a Sisko fluid, Z. Naturforsch. A, Vol. 67, (2012), pp. 469-478 |

32 | Azeem Shahzad, Masood Khan, On boundary layer flow of Sisko fluid over a stretching sheet, Quaestiones Mathematicae, Vol. 36, No. 1, (2013), pp. 137-151 |

33 | Masood Khan, Naila Shaheen, Azeem Shahzad, Steady flow and heat transfer of a MHD Sisko fluid through porous medium in annular pipe, Int. J. Numer. Meth. Fluids, Vol. 69, (2012), pp. 1907-1922 |

34 | Azeem Shahzad, Ramzan Ali, Approximate Analytic solution for Magneto-hydrodynamic flow of a non-Newtonian fluid over a vertical stretching sheet., Canadian journal of applied sciences., Vol. 2, (2012), pp. 202-215 |

35 | Azeem Shahzad, Ramzan Ali, Masood Khan, MHD Falkner-Skan flow with mixed convection and convective surface boundary condition, Walailak J Sci & Tech, Vol. 10, No. 5, (2013), pp. 517-529 |

36 | Azeem Shahzad, Ramzan Ali, MHD flow of a non-Newtonian power-law fluid over a vertical stretching sheet with convective boundary condition, Walailak J Sci & Tech, Vol. 10, No. 1, (2013), pp. 43-56 |

37 | Azeem Shahzad, Ramzan Ali, Masood Khan, On the exact solution for the axisymmetric flow and heat transfer over a non-linear radially stretching sheet, Chinese Physics Letter, Vol. 29, (2012), pp. 084705-084708 |

38 | T. Aziz, F. M. Mahomeda, Azeem Shahzad and R. Ali, Travelling Wave Solutions for the Unsteady Flow of a Third Grade Fluid Induced due to Impulsive Motion of Flat Porous Plate Embedded in a Porous Medium, Journal of Mechanics, Vol. 30, No. 5, (2014), pp. 527-535 |

39 | Masood Khan, Azeem Shahzad, Asia Anjum, Fazal M Mahomed, Analytic approximate solutions for time-dependent flow and heat transfer of a Sisko fluid, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 24, No. 5, (2014), pp. 1005-1019 |

40 | Masood KHAN, Asif MUNIR, Azeem SHAHZAD, 13. Heat transfer for MHD Second Grade fluid flow over a porous nonlinear radially stretching sheet, Walailak Journal of Science & Technology, Vol. 12, No. 9, (2015), pp. 763-773 |

41 | Masood KHAN, Asif MUNIR, Azeem SHAHZAD, 14. MHD flow and heat transfer of a viscous fluid over a radially stretching power-law sheet with suction/injection in a porous medium, Journal of Applied Mechanics and Technical Physics, Vol. 56, No. 2, (2015), pp. 231-240 |

42 | Asif Munir, Azeem Shahzad, Masood Khan, 10. Forced Convective Heat Transfer in Boundary Layer Flow of Sisko Fluid over a Nonlinear Stretching Sheet, PloS One, Vol. 9, No. 6, (2014), pp. e100056 |

43 | Asim Aziz, Taha Aziz, F. M. Mahomed, Azeem Shahzad, Analytical solution for time-dependent flow of a third grade fluid induced due to impulsive motion of a flat porous plate, Acta Mathematicae Applicatae Sinica, English Series, Vol. 31, No. 3, (2015), pp. 757-766 |

44 | Asif Munir, Azeem Shahzad, Masood Khan, Convective Flow of Sisko Fluid over a Bidirectional Stretching Surface, PloS one, Vol. 10, No. 6, (2015), pp. e0130342 |

45 | Asif Munir, Azeem Shahzad, Masood Khan, Mixed convection heat transfer in Sisko fluid with viscous dissipation: Effects of assisting and opposing buoyancy, Chemical Engineering Research and Design, Vol. 97, (2015), pp. 120-127 |

46 | Ramzan Ali, Azeem Shahzad, Masood Khan, Muhammad Ayub, Analytic and numerical solutions for axisymmetric flow with partial slip, Engineering with Computers, (2015), pp. 1-6 |

47 | Asif Munir, Azeem Shahzad, Masood Khan, Convective flow of Sisko fluid over a wedge with viscous dissipation, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2015), pp. 1-7 |

48 | Ali, H. M. and Briggs, A., Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Circumferential Pin Geometry, 11th UK National Heat Transfer Conference, London, UK, 6-8 September (2009), pp. Paper No. 65, |

49 | Jajja, S.A., Ali, W. and Ali, H.M., Multi Walled Carbon Nanotube Nanofluids for thermal management of high heat generating computer processors, J. of Heat Transfer - Asian Research, (2013), pp. |

50 | Khattak, Z., Ahmed, J., Ali, H.M. and Shah, S., Contemporary Dust Control Techniques in Cement Industry, Electrostatic Precipitator – A Case Study, World Applied Sciences Journal, Vol. 22, No. 2, (2013), pp. 202-209 |

51 | Ali, H. M. and Briggs, A., Condensation Heat Transfer on Pin-Fin Tubes: Effect of Thermal Conductivity and Pin Height, J. of Applied Thermal Engineering, Vol. 60, (2013), pp. 465-471 |

52 | Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M., An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Thermal Science, (2013), pp. |

53 | Ali, H. M. and Briggs, A., An investigation of Condensate Retention on Pin-Fin Tubes, Proc. of the World Congress on Engineering 2013 (WCE 2013), London, (2013), pp. 1941-1946, |

54 | Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M., An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Proc. of the International Symposium on Innovative Materials for Processes in Energy Systems 2013 (IMPRES2013), Fukuoka, Japan, (2013), pp. Paper No. IMPRES2013-070, |

55 | H. M. Ali, W. Arshad, Effect of Channel Angle of Pin-Fin Heat Sink on Heat Transfer Performance using Water based Graphene Nanoplatelets Nanofluids, International J. of Heat and Mass Transfer, Vol. 106, No. 1, (2017), pp. 465-472 |

56 | Arshad, A., Ali, H. M., Ali, M. and Manzoor, S., Thermal Performance of Phase Change Material (PCM) based Pin-Finned Heat sinks for Electronics Devices: Effect of Pin Thickness and PCM Volume Fraction, Applied Thermal Engineering, Vol. 112, No. 1, (2017), pp. 143-155 |

57 | Ali, H. M., An Analytical Model for Prediction of Condensate Flooding on Horizontal Pin-fin Tubes, International J. of Heat and Mass Transfer, Vol. 106, No. 1, (2017), pp. 1120-1124 |

58 | Farooqi, M.I, Nasir, M.A, Ali, H. M. and Ali, Y., Experimental validation of transverse shear behavior of Nomex core for composite sandwich panels, Mechanics of Composite Materials, Vol. 53, No. 2, (2017), pp. 193-202 |

59 | Arshad, W. and Ali, H. M., Graphene nanoplatelets nanofluids thermal and hydrodynamic performance on integral fin heat sink, International J. of Heat and Mass Transfer, Vol. 107, No. 1, (2017), pp. 995-1001 |

60 | Ali, H. M., Generous, M. M., Ahmad, F. and Irfan, M., Experimental Investigation of Nucleate Pool Boiling Heat Transfer Enhancement of TiO2-Water based Nanofluids, Applied Thermal Engineering, Vol. 113, No. 1, (2017), pp. 1146-1151 |

61 | Ali, H., Kamran, M. S., Ali, H. M. Imran, S., Farukh, F., and Wang, H. S., Marangoni Condensation of Steam-Ethanol Mixtures on a Horizontal Low-Finned Tube, Applied Thermal Engineering, Vol. 117, No. 1, (2017), pp. 366-375 |

62 | Khan, S. A., Ali, M., Shehryar, M., Tanzeel-Ur-Rashid, Khalil, M. S., Ali, H. M. and Gilani, S. I., Performance Analysis of a Low Capacity Solar Tower Water Heating System in Climate of Pakistan, Energy and Buildings, Vol. 143, No. 1, (2017), pp. 84-99 |

63 | Arshad, W. and Ali, H. M., Experimental Investigation of Heat Transfer and Pressure Drop in a Straight Minichannel Heat Sink with TiO2 Nanofluid, International J. of Heat and Mass Transfer, Vol. 110, No. 1, (2017), pp. Page 248-256 |

64 | Ali, H. M. and Arshad, A., Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices, International J. of Heat and Mass Transfer, Vol. 112, No. 1, (2017), pp. 649-661 |

65 | Ali, H. M., Zafar, M.A, Bashir, M.A, Nasir, M. A., Ali, M. and Siddiqui, A.M., Effect of Dust Deposition on the Performance of Photovoltaic Modules in Taxila, Pakistan, Thermal Science, Vol. 21, No. 2, (2017), pp. 915-923 |

66 | Ashraf, M. J., Ali, H. M., Usman, H. and Arshad, A., Experimental passive electronics cooling: parametric investigation of pin-fin geometries and efficient phase change materials, International J. of Heat and Mass Transfer, Vol. 115, (2017), pp. 251-263 |

67 | Iqbal, M. H., Ali, M., Sheikh, N. A., Ali, H.M. and Manzoor, M. S., Performance Investigation of Air Velocity Effects on PV Modules under Controlled Conditions, International Journal of Photoenergy, Vol. 2017, (2017), pp. 10 |

68 | Rana, K., Manzoor, S., Sheikh, N. A., Ali, M. and Ali, H. M., Gust Response of a Rotating Circular Cylinder in the Vortex Suppression Regime, International J. of Heat and Mass Transfer, Vol. 115, (2017), pp. 763-776 |

69 | Ali, A. M., Arshad, W., Ali, H. M., Ali, M. and Nasir, M. A., Evaluation of Nanofluids Performance for Simulated Microprocessor, J. Thermal Science, Vol. 21, No. 5, (2017), pp. 2227-2236 |

70 | Ali, H., Hayat, N., Farukh, F., Imran, S. and Ali, H. M, Key design features of multi glazed windows: A Review, J. Thermal Science, Vol. 21, No. 6, (2017), pp. 2673-2687 |

71 | Arshad, A., Ali, H. M., Khushnood, S. and Jabbal, M., Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter, International J. of Heat and Mass Transfer, Vol. 117, (2018), pp. 861-872 |

72 | Ali, H. M., Arshad, A., Jabbal, M. and Verdin, P.G., Thermal management of electronics devices with PCMs filled pin-fin heat sinks: A comparison, International J. of Heat and Mass Transfer, Vol. 117, (2018), pp. 1199-1204 |

73 | Arshad, A., Ali, H. M., Yan, W-M., Hussein, A. K., and Ahmadlouydarab, M., An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material, Applied Thermal Engineering, Vol. 132, (2018), pp. 52-66 |

74 | Amber, K. P., Ali, H. M., Aslam, M. W., Kousar, A., Ikram, F., Ahmad, Z. and Hussain, S. K., Heating and Cooling Degree-Days Maps for Pakistan, Energies, Vol. 11, No. 1, (2018), pp. 94 |

75 | Chatha, M. B., Ali, H. M., Ali, M. and Bashir, M. A., Experimental investigation of monocrystalline and polycrystalline solar modules at different inclination angles, J. of Thermal Engineering, Vol. 4, No. 2, (2018), pp. 2137-2148 |

76 | Mahbubul, I. M., Khan, M. M. A., Ibrahim, N. I., Ali, H. M., Saidur, R. and Al-Sulaiman, F. A., Carbon nanotube nanofluid in enhancing the efficiency of evacuated tube solar collector, Renewable Energy, Vol. 121, (2018), pp. 36-44 |

77 | Ali, M., Vukovic, V., Ali, H. M. and Sheikh, M. A., Performance Analysis of Solar Assisted Desiccant Cooling System Cycles in World Climate Zones, Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, Vol. 140, No. 4, (2018), pp. 041009 |

78 | Ali, H. M., Ashraf, M. J., Giovannelli, A., Hassan, F., Hamid, H. M., Irshad, T. B., Irfan, M. and Arshad, A., Thermal management of electronics: an experimental optimization of triangular, rectangular and circular pin-fins heat sinks for various PCMs, International J. of Heat and Mass Transfer, Vol. 123, (2018), pp. 272-284 |

79 | Khan, M. M. A., Ibrahim, N. I., Mahbubul, I. M., Ali, H. M., Saidur, R. and Al-Sulaiman, F. A, Evaluation of Solar Collectors Designs with Integrated Latent Heat Thermal Energy Storage: A Review, Solar Energy, Vol. 166, (2018), pp. 334-350 |

80 | Ali, H.M., Babar, H., Shah, T.R., Sajid, M.U., Qasim, M.A. and Javed, S, Preparation Techniques of TiO2Nanofluids and Challenges: A Review, Applied Sciences, Vol. 8, (2018), pp. 587 |

81 | Saieed, A., Pao, W. and Ali, H.M., Prediction of phase separation in a T-Junction, Experimental Thermal and Fluid Science, Vol. 97, (2018), pp. 160-179 |

82 | Sajid, M. U. and Ali, H. M., Thermal conductivity of hybrid nanofluids: A critical review, International J. of Heat and Mass Transfer, Vol. 126, (2018), pp. 211-234 |

83 | Akram, M. A., Nawaz, M. N., Mehmood, A., Ali, H. M., Anum, A., Akmal, S, Nizam, L. A., Khushnood, Experimental Analysis of Tooth Breakage Effect on the Vibration Characteristics of Spur Gears, Technical Journal of UET Taxila, Vol. 23, No. 1, (2018), pp. 43-58 |

84 | Saieed, A., Pao, W. Hewakandamby, B., Azzopardi, B. J., Wood, D. A. and Ali, H.M., Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction, Journal of Petroleum Science and Engineering, Vol. 170, (2018), pp. 139-150 |

85 | Ali, H. M., Ali, H., Ali, M., Imran, S., Kamran, M. S. and Farukh, F., Effect of Condensate Flow Rate on Retention Angle on Horizontal Low-Finned Tubes, Thermal Science, Vol. 22, No. 1, (2018), pp. 435-441 |

86 | Ali, H. M., Arshad, A., Janjua, M. M., Baig, W. and Sajjad, U., Thermal Performance of LHSU for Electronics under Steady and Transient Operations Modes, International J. of Heat and Mass Transfer, Vol. 123, (2018), pp. 223-1232 |

87 | Khan, A., Ali, H. M., Khushnood, S., Khattak, Z, Experimental study of horizontal ground source heat exchanger system, Proceedings book of third international conference on advances in mechanical engineering: ICAME, Turkey, 19-21 December (2017), pp. 428-442, |

88 | Khattak, Z., Afzal, M. N., Ali, H. M., Khan, A., Prototyping of Wind-Turbine using Matlab/Simulink approach, Proceedings book of third international conference on advances in mechanical engineering: ICAME, Turkey, 19-21 December (2017), pp. 565-572, |

89 | Khattak, Z., Khan, M. M. A., Ali, H. M., Hadi, F., Energy Regeneration via vehicle braking system, “Inertial- approach”, Proceedings book of third international conference on advances in mechanical engineering: ICAME, Turkey, 19-21 December (2017), pp. 573-580, |

90 | Khan, A., Ali, H. M., Khushnood, S., Shah, S. S., Ali, M. N., Utilization of Exhaust Heat of Internal Combustion Engines for Cooling Purpose: A Review, Proceedings abstract book of 1st International Graduate Conference on Emerging Trends in Multidisciplinary Approaches (IGCETMA-2018), Johor Bahru, Malaysia, 16-18 Feb (2018), pp. 63, |

91 | Akram, M. A., Nawaz, M. N., Mehmood, A., Ali, H. M., Anum, A., Akmal, S, Nizam, L. A., Khushnood, Experimental Analysis of Tooth Breakage Effect on the Vibration Characteristics of Spur Gears, Proceedings abstract book of 1st International Graduate Conference on Emerging Trends in Multidisciplinary Approaches (IGCETMA-2018), Johor Bahru, Malaysia, 16-18 Feb (2018), pp. 64, |

92 | Khattak, Z., Shah, S., Ali, H. M., Ahmad, J., Study and Analysis of Magneto Hydro Dynamic Power Generation Technology and its Temperature Sustainability, Proceedings abstract book of 1st International Graduate Conference on Emerging Trends in Multidisciplinary Approaches (IGCETMA-2018), Johor Bahru, Malaysia, 16-18 Feb (2018), pp. 65, |

93 | Tariq, S. L., Ali, H. M. and Rasheed, T. U., Solar energy-the energy of future transport and a case study of solar powered railway in Pakistan, Proceedings book of International Conference on Progresses in Automotive Technologies 2018 (ICPAT 2018), Elite World Prestige Hotel, Istanbul, Turkey, MAY 10-12 (2018), pp. 107-113, |

94 | Babar, H., Ali, H. M., Haseeb, M., Abubaker, M., Muhammad, A. and Irfan, M., Experimental Investigation of the Ground Coupled Heat Exchanger System under the Climatic Conditions of Sahiwal, Proc. of the World Congress on Engineering 2018 (WCE 2018), Imperial College, London, UK, July 4-6 (2018), pp. 778-782, |

95 | Muhammad Sajjad Sabir Malik, Aamer Baqai, Raja Amer Azim, A BOND GRAPH APPROACH TO HYDRAULIC HYBRID VEHICLE, IASTED International Conference of Modelling, Simulation, and Identification (MSI 2011), Pittsburgh, USA, November 7 - 9, 2011 (2011), pp. 174-181, IASTED |

96 | Muhammad Sajjad Sabir Malik, Mubashir Gulzar, Muhammad Saqib Anwar, Mudassir Hussain, Anatomization of Stresses on a V-12 Engine Crankshaft Vulnerable to Varying Imposed Forces, Applied Mechanics and Materials, Vol. 392, (2013), pp. 141-145 |

97 | M. Zubair, Z. Zhang, Reliability Data Update Method (RDUM) based on living PSA for emergency diesel generator of Daya Bay nuclear power plant, Safety Science (Elsevier), Vol. 59, No. 11, (2013), pp. 72-77 |

98 | M. Zubair, Z. Zhang, G. Heo, I. Ahmed, M. Aamir, A computer based living probabilistic safety assessment (LPSA) method for nuclear power plants, Nuclear Engineering and Design, Vol. 265, No. 12, (2013), pp. 765-771 |

99 | M. Zubair, G. Heo, Advancement in Living Probabilistic Safety Assessment (LPSA) to Increase Safety of Nuclear Power Plants, Journal of Risk and Reliability, Vol. 227, No. 5, (2013), pp. 534-539 |

100 | M. Zubair, P. Sujin, G. Heo, Prioritization of Lesson learned from Fukushima Accident using AHP, Transactions of the Korean Nuclear Society, Vol. 2013, (2013), pp. 589-590 |

101 | Rahman Khalil Ur, Jinsoo Shin, Muhammad Zubair, Gyunyoung Heo, and Hanseong Son, Sensitivity Study on Availability of I&C Components Using Bayesian Network, Science and Technology of Nuclear Installations, Vol. 2013, (2013), pp. 1-10 |

102 | M. Zubair, Khalil Ur Rahman, Mehmood Ul Hassan, An Online Risk Monitor System to Increase Safety and Security Levels in Industry, Ist International Conference on Sensing for Industry, Control, Communication &Security; Technologies, Karachi, Pakistan, June 24-26 (2013), pp. , IOP Sciences |

103 | Rahman Khalil Ur, Muhammad Zubair, Gyunyoung Heo, Sensitivity Analysis of Digital I&C Modules in Protection and Safety Systems, Ist International Conference on Sensing for Industry, Control, Communication &Security; Technologies, Karachi, Pakistan, 24-26 June (2013), pp. , IOP Sciences |

104 | M. Zubair, Use of Living Probabilistic Safety Assessment (LPSA) to Increase Energy Level in Nuclear Industry, 2nd International Conference on Energy, Environment & Sustainable Development (EESD2012), , (2012), pp. , |

105 | M. Zubair, Z. Zhang, S.U.D. Khan, Calculation and Updating of Reliability Parameters in Probabilistic Safety Assessment, Journal of Fusion Energy, Vol. 30, No. 1, (2011), pp. 13-15 |

106 | M. Zubair, Z. Zhang, S.U.D. Khan, A Methodology for Living Probabilistic Safety Assessment (LPSA) Based on Advanced Control Room Operator Support System;ACROSS, Annals of Nuclear Energy, Vol. 38, No. 6, (2011), pp. 1351-1355 |

107 | M. Zubair, Z. Zhang, Reliability data update method for Emergency Diesel Generator of Daya Bay Nuclear Power Plant, Annals of Nuclear Energy, Vol. 38, No. 11, (2011), pp. 2575-2580 |

108 | M. Zubair, Z. Zhang, Role of Risk Manager for Online Risk Monitoring, Advanced Materials Research journal, Vol. 230, (2011), pp. 424-428 |

109 | M. Zubair, Z. Zhang, Estimation of Failure Rate with the help of Risk Monitors, Book Chapter, Lecture notes in electrical engineering, Springer, , (2011), pp. 1007-1014, |

110 | M. Zubair, Z. Zhang, S.U.D. Khan, Reliability Data Update Method with Gamma Distribution, pacific Power and Energy Engineering Conference (APPEEC 2011), Wuhan (China), 25-28 March (2011), pp. 1-4, IEEE |

111 | S.U.D.Khan, M.Peng, M.Zubair, Loss of feed water accident in an Integral Pressurized Water Reactor by using Relap5/Mod3.4, Advanced Material Research journal, Vol. 171, (2011), pp. 379-384 |

112 | S.U.D.Khan, M.Peng, M.Zubair, Normal operational state of Integral Pressurized Water reactor by using Relap5/Mod3.4, Advanced Material Research journal, Vol. 171, (2011), pp. 374-378 |

113 | S.U.D.Khan, M.Peng, M.Zubair, Study on the Evaluation and Simulation of steady state behavior and Reactor Safety concept for Integral Pressurized Water Reactor (IPWR), Information Technology Journal, Vol. 10, No. 5, (2011), pp. 983-991 |

114 | S.U.D.Khan, M.Peng, M.Zubair, Simulation of Loss of Coolant Accident in an Integral Pressurized Water Reactor (IPWR), Advanced Material Research Journal, Vol. 230, (2011), pp. 410-414 |

115 | S.U.D.Khan, M.Peng, M.Zubair, Preliminary Assessment of Main Steam Line Break Accident in an Integral Pressurized Water Reactor, 3rd Asia Pacific Power and Energy Engineering Conference, Wuhan, China, 25-28 March (2011), pp. 1-4, IEEE |

116 | S.U.D.Khan, M.Peng, M.Zubair, Neutronics and Thermal hydraulic coupling methods for Nuclear Reactor Core, 3rd Asia Pacific Power and Energy Engineering Conference (APPEEC), Wuhan, China, 25-28 March (2011), pp. 1-4, IEEE |

117 | S.U.D.Khan, M.Peng, M.Zubair, W. Shaowu, A Review on Specific Features of Small and Medium Sized Nuclear Power Plants, 18th International Conference on Nuclear Engineering(ICONE-18), Xian, China, 17-21 May (2010), pp. 1-4, ASME |

118 | M. Zubair, Z. Zhang, S.U.D. Khan, S.D. Hua, A Methodology for Updating Living Probabilistic Safety Assessment, 18th International conference on nuclear engineering (ICONE-18), Xian, China, 17-21 May (2010), pp. , ASME |

119 | M. Zubair, Z. Zhang, A Review: Advancement in Probabilistic Safety Assessment and Living Probabilistic Safety Assessment, Asia pacific Power and Energy Engineering Conference (APPEEC), Chengdu, China, 28-31 March (2010), pp. 1-4, IEEE |

120 | Rahman Khalil Ur, Muhammad Zubair, Gyunyoung Heo, Reliability Analysis of Nuclear I&C Architecture using Bayesian Networks, 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST), Islamabad, Pakistan, (2014), pp. 169-174, IEEE |

121 | M. Zubair, G. Heo, R. Khalil, S. Park, A Hybrid Approach for Reliability Analysis Based on Analytic Hierarchy Process (AHP) and Bayesian Network (BN), International Conference on Nuclear Engineering, Prague, Czech Republic, July 7-11, 2014 (2014), pp. , ASME |

122 | S. Park, HC. Yang, G. Heo, M. Zubair, Prioritization of Underlying Precursors in Nuclear Accidents, International Conference on Nuclear Engineering, Prague, Czech Republic, July 7-11, 2014 (2014), pp. , ASME |

123 | R. Khalil, G. Heo, MC. Kim, M. Zubair, Formulation and Reliability Feature Analysis of Analog, Digital and Hybrid I&C Architectures for Research Reactors, International Conference on Nuclear Engineering, Prague, Czech Republic, July 7-11, 2014 (2014), pp. , ASME |

124 | Muhammad Aamir, Liao Qiang, Zhu Xun, Wang Hong, Muhammad Zubair, Ultra Fast Spray Cooling and Critical Droplet Daimeter Estimation from Cooling Rate, Journal of Power and Energy Engineering, Vol. 2, (2014), pp. 259-270 |

125 | Muhammad Aamir, Qiang Liao, Zhu Xun, Aqeel ul Rehman, Wang Hong, and Muhammad Zubair, Estimation of Surface Heat Flux and Surface Temperature during Inverse Heat Conduction under Varying Spray Parameters and Sample Initial Temperature, The Scientific World Journal, Vol. 2014, (2014), pp. 1-13 |

126 | Sujin Park, Huichang Yang, Gyunyoung Heo, Muhammad Zubair, and Rahman Khalil Ur, Study on Nuclear Accident Precursors Using AHP and BBN, Science and Technology of Nuclear Installations, Vol. 2014, (2014), pp. 1-12 |

127 | M. Zubair, R. Ahmed and G. Heo, Quantitative and qualitative analysis of safety parameters in nuclear power plants, International Journal of Energy Research, Vol. 38, No. 6, (2014), pp. 755-764 |

128 | S. Haider, A. Ghafoor, M. Imran, F. M. Malik, Model reduction of large scale descriptor systems using time limited Gramians, Asian Journal of Control, Vol. 19, No. 4, (2017), pp. 1-11 |

129 | S. Haider, A. Ghafoor, M. Imran, F. M. Malik, Frequency interval Gramians based structure preserving model order reduction for second order systems, Asian Journal of Control, Vol. 20, No. 4, (2017), pp. 1-12 |

130 | S. Haider, A. Ghafoor, M. Imran, F. M. Malik, Frequency limited Gramians based structure preserving model order reduction for discrete time second order systems, International Journal of Control, (2018), pp. 1-19 |

131 | M. Saqlain, M. Riaz, and S. Haider, Controller design for performance analysis and optimization of twin rotor system, Science International Journal, Vol. 29, No. 2, (2017), pp. 349-355 |

132 | S. Haider, A. Ghafoor, M. Imran, F. M. Malik,, Techniques for computation of frequency limited H-Infinity norm, International Conference on Power and Energy Engineering, China, (2017), pp. 1-10, IOP Publishing Ltd |

133 | S. Haider, I. H. Kazmi, M. I. Rehman,, Kalman filter based state estimation for Linearized Twin Rotor System, Frontiers of information technology, Pakistan, May (2011), pp. 1-4, CIIT IEEE Pakistan |