RSS feed



All Publications

Total Publications = 30

1 Waqas Anwar, Israr Ahmad, Shahid Mehmood, Nazeer Ahmad Anjum, Effect of structural dynamic characteristics on fatigue and damage tolerance of aerospace grade composite materials, Aerospace Science and Technology, Vol. 64, (2017), pp. 39-51
2 Shahid Mehmood, Masood Shah, Riffat Asim Pasha, Shahab Khushnood & Amir Sultan, Influence of electric discharge machining on fatigue limit of high strength aluminum alloy under finish machining, Journal of the Chinese Institute of Engineers, Vol. 40, No. 2, (2017), pp. 118-125
3 Shahid Mehmood, Riffat Asim Pasha, Masood Shah, Amir Sultan, Investigation of Endurance Limits and Analysis of Electric Discharge Machined Surface of Aluminum Alloy 2024 T6, Technical Journal, University of engineering and technology Taxila, Vol. 21, No. 3, (2016), pp. 69-75
4 Shahid Mehmood, Amir Sultan, Nazeer Ahmad Anjum, Waqas Anwar, Zubair Butt, Determination of Residual Stress distribution in high Strength Aluminum alloy after EDM, Advances in Science and Technology Research Journal, Vol. 11, No. 1, (2017), pp. 29-35
5 Shahid Mehmood,Riffat Asim PAsha, Amir Sultan, Effect of Electric Discharge Machining on Material Removal Rate and White Layer Composition, Mehran University Research Journal of Engineering & Technology, Vol. 36, No. 1, (2017), pp. 45-54
6 Kamran Javed, Amir Sultan,Shahid Mehmood, FPGA Implementation of Advance Encryption Standard With Single Key, Journal of Faculty of Engineering & Technology, Vol. 23, No. 2, (2016), pp. 39-48
7 Zubair Butt, Zeeshan Anjum, Amir Sultan, Faisal Qayyum, Hafiz Muhammad Khurram Ali, Shahid Mehmood, Investigation of Electrical Properties & Mechanical Quality Factor of Piezoelectric Material (PZT-4A), Journal of Electrical Engineering & Technology, Vol. 12, No. 2, (2017), pp. 846-851
8 Nazeer Ahmad Anjum,Saba Anjum, Zaheer Abbas,Shahid Mehmood, Waqas Anwar, Notch Fatigue Behavior of Aluminum 2024-T6 in Four Point Bending Rotation, Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, Vol. 22, No. 1, (2017), pp. 81-85
9 M. Imran, M. Shah, S. Mehmood, Z. Abbas, F. Qayyum, Characterization of EDM Surface Morphology of Al-6061using different dielectrics, Technical Journal, University of engineering and technology Taxila, Vol. 22, No. 3, (2017), pp. 51-57
10 Shahid Mehmood, Masood Shah, Riffat Asim Pasha, Amir Sultan, Evaluation of Fatigue Behavior and Surface Characteristics of Aluminum Alloy 2024 T6 after Electric Discharge Machining, Journal of Materials Engineering and Performance, Vol. 26, No. 10, (2017), pp. 4910-4922
11 Muhammad Imran, Sayyid Masoodur Rahman shah, Shahid Mehmood, Rubab Arshad, EDM of aluminum alloy 6061 using graphite electrode using paraffin oil and distilled water as dielectric medium, Advances in Science and Technology Research Journal, Vol. 11, No. 3, (2017), pp. 72-79
12 Shahbaz Ahmed, Amir Sultan, Shahid Mehmood, Mubbashar Mehmood, Bakht Bahadur Rana, Design and Implementation of Biaxial Solar Tracker using Arduino, Journal of Faculty of Engineering & Technology, Vol. 24, No. 2, (2017), pp.
13 Shahid Mehmood, Masood Shah , Bakht Bahadur Rana, N.A. anjum , Amir Sultan, Comparative study of white layer characteristics for static and rotating workpiece during electric discharge machining, Mehran University Research Journal of Engineering & Technology, Vol. 36, No. 4, (2017), pp. 819-830
14 N. A. Anjum, S. Mehmood, M. Z. Khan, W. Anwar, S. Shahid, S. Anjum, Design, Fabrication and Manufacturing of 100 Ton Hydraulic Press to Perform Equal Channel Angular Pressing (ECAP), Technical Journal, University of engineering and technology Taxila, Vol. 22, No. 11, (2017), pp. 73-78
15 Saba Anjum, Masood Shah, N. A. Anjum, Shahid Mehmood, Waqas Anwar, Machining and Surface Characteristics of AISI 304L after Electric Discharge Machining for Copper and Graphite Electrodes in Different Dielectric Liquids, Engineering, Technology & Applied Science Research, Vol. 7, No. 4, (2017), pp. 1765-1770
16 Zubair Butt, Zeeshan Anjum, Amir Sultan, Faisal Qayyum, Hafiz Muhammad Khurram Ali and Shahid Mehmood, Investigation of Electrical Properties & Mechanical Quality Factor of Piezoelectric Material (PZT-4A), Journal of Electrical Engineering and Technology, Vol. 12, No. 2, (2017), pp. 846-856
17 Hafiz Muhammad Khurram Ali, Mirza Jahanzaib, Javed Akhtar, Amir Sultan, Bakht Bahadur Rana and Adeel Ahsen, Cement Industry Preferences for Captive Power Plants in Perspective of Current Energy Crisis in Pakistan, Journal of Faculty of Engineering & Technology, Vol. 23, No. 1, (2016), pp. 65-76
18 Zubair Iqbal, Hafiz Muhammad Khurram Ali, Ahmad Wasim, Salman Hussain and Mirza Jahanzaib, Evaluating Suppliers' Efficiency using Conjoint Analysis, The Nucleus 121-127, June, 2016, Vol. 53, No. 2, (2016), pp. 121-127
19 Zain Ul Abidin, Hafiz Muhammad Khurram Ali, Salman Hussain, Ahmad Wasim and Mirza Jhanzaib, Supplier Selection in an Industry of Short Lifecycle Products Using Bayesian Network Analysis, Pakistan Journal of Science, Vol. 68, No. 2, (2016), pp. 157-163
20 Hafiz Muhammad Khurram Ali, M. U. Farooq, A. Wasim, M. Jhanzaib and S. Hussain, Leverage of Office Automation in a Public Sector Engineering Organization: Pre and Post Implementation Analysis, Pakistan Journal of Science, Vol. 68, No. 2, (2016), pp. 170-175
21 Muhammad Khurram Ali, Khalid Akhtar and Mirza Jahanzaib, A Hybrid Multidimensional Approach to Select a Country for Global Cement Plant Location, Mehran University Research Journal of Engineering & Technology, Vol. 34, No. 2, (2015), pp. 155-168
22 Hafiz Muhammed Khurram Ali, Rafi Javed Qureshi and Mirza Jahanzaib, Selecting Facility Location Using Hybrid Methodologies In Global Perspective: A Case of Cement Plant, Journal of Engineering and Applied Sciences (JEAS), University of Engineering & Technology Peshawar, Vol. 33, No. 1, (2014), pp. 55-70
23 Kamran Gohar, Mirza Jahanzaib and Muhammad Khurram Ali, Consumer Preferences for Selection of Solar Home Systems in Urban Areas of Pakistan, Mehran University Research Journal of Engineering & Technology, Vol. 33, No. 4, (2014), pp. 441-448
24 Mirza Jahanzaib, Syed Athar Masood, Khalid Akhtar, Muhammad Khurram Ali, Managing Competitiveness using Production Volumes - Product Variety Model for Automobile Industry, Life Science Journal, Vol. 10, No. 4, (2013), pp. 202-208
25 Omar Khalid, Zubair Butt,Waqas Tanveer, Hasan Iqbal Rao, Design and experimental analysis of counter-flow heat and mass exchanger incorporating (M-cycle) for evaporative cooling, Heat and Mass Transfer, Vol. 53, No. 4, (2017), pp. 1391-1403
26 Zubair Butt, Riffat Asim Pasha, Faisal Qayyum, Zeeshan Anjum, Nasir Ahmad and Hassan Elahi, Generation of electrical energy using lead zirconate titanate (PZT-5A) piezoelectric material: Analytical, numerical and experimental verifications, Journal of Mechanical Science and Technology, Vol. 30, No. 8, (2016), pp. 3553-3558
27 Z. Butt and R. A. Pasha, Effect of temperature and loading on output voltage of lead zirconate titanate (PZT-5A) piezoelectric energy harvester, 14th International Symposium on Advanced Materials, Vol. 146, No. 1, (2016), pp. 1-5
28 Zubair Butt,Shafiq Ur Rahman,Riffat Asim Pasha,Shahid Mehmood,Saqlain Abbas,Hassan Elahi, Characterizing Barium Titanate Piezoelectric Material Using the Finite Element Method, TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS, Vol. 18, No. 3, (2017), pp. 163-168
29 Hassan Elahi,Zubair Butt, Marco Eugnei, Paolo Gaudenzi and Asif Israr, Effects of variable resistance on smart structures of cubic reconnaissance satellites in various thermal and frequency shocking conditions, Journal of Mechanical Science and Technology, Vol. 31, No. 9, (2017), pp. 4151-4157
30 M. Saqlain Abbas, M. Zulkarnain Abbas, Riffat Asim Pasha, Zahid Suleman, Zubair Butt, Design and fabrication of wave energy power plant using oscillating water column technique, 2nd International Confernce on Power Generation system and Renewable Energy Technologies, Islamabad, 10-11 June 2015 (2015), pp. 1-4, 978-1-4673-6813-1/15/$31.00 ©2015 IEEE

To access members area, please Login or Register

Navigation