RSS feed



All Publications

Total Publications = 304

1 Riffat Asim Pasha, M. Asif Khan, Acoustic Emission as Real Time NDT Technique, Thechnical Journal, UET Taxila, (2005), pp. 89-95
2 Riffat Asim Pasha, H. Sana Ullah ,M.Z.Khan,, stimate the Thermo mechanical Fatigue Life Of Two Flip Chip Packages, Proceedings of 9th International Symposium On Advance Materials(ISAM-2005), , (2005), pp. 657-662,
3 Riffat Asim Pasha, M. Asif Khan, An Acoustic Emission Investigation Of Micro Fracture Processes in Nuclear Pressure Vessel Steel, Technical Journal, UET Taxila, (2006), pp. 149-161
4 M.M.I Hammouda, M.B.Sajid, R.A.Pasha, Numerical Approach to the Mechanics Of Disc-Blade Dovetail Joints In Aero-Engine Compressors, 14th International Conference On the Strength of Materials, Xi, an China, , 4-9 June 2006 (2006), pp. ,
5 M.M.I.Hammouda, R.A.Pasha, I.G.El-Batanony, Probable Cracking Development in Axial Dovetail Joints of Aero Engine Compressor Discs, International Conference on “Crack Paths” (CP 2006), Parma, Italy, 14-16 September 2006 (2006), pp. ,
6 Riffat Asim Pasha, M.Z.Khan, Recent Developments In Piezoelectric Ceramics Materials and Deteriorations of their Properties, Proceedings of Second International Conference on Frontiers of Advanced Engineering Materials, , 04-06 Dec,2006 (2006), pp. 13-19,
7 Riffat Asim Pasha, Zahid Suleman Butt, M. Asif Khan, Rule based expert system on the basis of estimated technique for the safety evaluation of various materials, Technical Journal, UET Taxila, (2007), pp. 47-54
8 M.M.I. Hammouda, R.A.Pasha, A.S.Fayed, Modelling of cracking sites/development in axial dovetail joints of aero-engine compressor discs, International Journal of Fatigue, Vol. 29, pp. 30-48
9 Riffat Asim Pasha, M.Z.Khan, A.M.Hashmi, Experimental Procedure of Frequency Determination in Piezoelectric Ceramics Materials, Al-Azhar University Engineering Journal, Vol. 2, No. 4, (2007), pp. 380-388
10 R. A Pasha, M.M.I. Hammouda, A Model For Notch Fatigue Life, Material Science and Engineering A, (2008), pp. 319-321
11 Riffat Asim Pasha, M.Z.Khan, Performance Characteristics of a Lead Zirconate Titanate Piezoelectric Ceramic Disc in Water, Mehran University Research Journal of Engineering & Technology, Vol. 29, No. 3, (2009), pp. 397-404
12 Mirza jahanzaib. Riffat Asim Pasha, Zahiz Suleman, Cogeneration an Opportunity for Industrial Energy Saving, Proceedings of the International Conference on Power Generation Systems & Renewable Energy Technologies, , (2010), pp. 403-409,
13 Riffat Asim Pasha, Talal Ahmed, A comparative analysis of orthotropic Elastic Constant of Nomex honeycomb core, The Nucleus, Vol. 49, No. 2, (2012), pp. 79-87
14 Riffat Asim Pasha, M. Zubair Khan, Performance Characteristics Model of A Thin Lead Zirconate Titanate Disc Under Different Conditions, The Nucleus, Vol. 49, No. 4, (2012), pp. 265-271
15 Muhammad Ali Nasir, Zaffar Khan, et al, Density variation effects on cross dimension (CD) strength of Phenolic multilayered composites fabricated via VARTM, The Nucleus, Vol. 51, No. 1, (2014), pp. 13-18
16 H.Elahi, R.A Pasha, M.Z Khan, E., xperimental Determination of Mechanical Quality Factor of Lead Zirconate Titanate (PZT-5A4E) by Equivalent Circuit Method Under Various Thermal and Resistance Conditions, Technical Journal, UET Taxila, Vol. 19, (2014), pp. 24-27
17 Hassan Elahi, RiffatAsim Pasha, Asif Israr, M. Zubair Khan, Experimental Determination of Effect of Variable Resistance on Lead Zirconate Titanate (PZT-5A4E) under various Thermal and Frequency Conditions, Asia Pacific Journal of Multidisciplinary Research, Vol. 2, No. 6, (2014), pp. 22-27
18 Mudassar Ullah, Riffat Asim Pasha, Ghulam Yasin Chohan, Faisal Qayyum, Numerical Simulation and Experimental Verification of CMOD in CT Specimens of TIG Welded AA2219-T87, Arabian Journal of Science and Engineering, Vol. 7, (2015), pp. 935-944
19 N.A. Anjum, M.Z. Khan, M. Shah, M.S. Khalil, R. A. Pasha, F. Qayyum and W. Anwar, Shear Strain Model for Equal Channel Angular Pressing in High Elastic Extruded Plastics, The Nucleus 52, No. 4, (2015), pp. 169-175
20 M. Saqlain Abbas, M. Zulkarnain Abbas, Riffat Asim Pasha, Zahid Suleman, Zubair Butt, Design and Fabrication of wave Energy Power Plant using Oscillating Water Column Technique, PGSRET IEEE Conference, , 2015 (2015), pp. 1 – 4,
21 M.A Nasir, M Ullah, Z.M.Khan, S Nauman, S.Anas, R.A.Pasha, M Shah, Y.Ali, Tensile strength changability of Multilayered Composites, fabricated through Optimized “VARTM” Technology, An Experimental approach, Technical Journal, UET Taxila, Vol. 20, (2015), pp.
22 Saqlain Abbas, Zulkarnain Abbas, Riffat Asim Pasha, Analytical Estimation and Numerical Simulation of Vibration Based Piezoelectric Energy Harvesters, International Journal of Science ,Engineering &Innovative; Research, (2016), pp. 1-9
23 Zubair Butt, Riffat Asim Pasha , Faisal Qayyum , Zeeshan Anjum , Nasir Ahmad and Hassan Elahi, Generation of electrical energy using lead zirconate titanate (PZT-5A) piezoelectric material: Analytical, numerical and experimental verifications, Journal of Mechanical Science and Technology, Vol. 30, No. 8, (2016), pp. 3553-3558
24 Din, Rafi ud; Shafqat, Qaisar; Shahzad, Muhammad, Ahmad, Ejaz, Rafiq, Nouman; Qureshi, Ammad, Syed, Waqar; Pasha, Riffat, Inhibitor effects of sodium benzoate on corrosion resistance of Al 6061-B4C composites in NaCl and H3BO3 solutions, Materials Research Express, (2016), pp. 1-12
25 Shahid Mehmood, Riffat Asim Pasha,Masood Shah,Amir Sultan, Investigation of Endurance Limits and Analysis of Electric Discharge Machined Surface of Aluminium Alloy 2024 T6, Technical Journal, UET Taxila, Vol. 21, No. 3, (2016), pp.
26 Shahid Mehmood, Riffat Asim Pasha, Amir Sultan, Effect of Electric Discharge Machining on Material Removal Rate and White Layer Composition, Mehran University Research Journal of Engineering and Technology, Vol. 36, No. 1, (2017), pp. 45-54
27 Zubair Butt, Riffat Asim Pasha,Zeeshan Anjum, Characterization of Barium Titanate (BaTiO3) Piezoelectric Material by using Finite Element Method, Transaction of Electr.Electron, Mater, (2017), pp.
28 Shahid Mehmood, Masod Shah, Riffat Pasha, Shahab Khushnood, Amir Sultan, Influence of electric discharge machining on fatigue limit of high strength aluminum alloy under finish machining, The Journal of Chinese Institute of Engineers, (2017), pp. 118-125
29 Shahid Mehmood,Masood Shah,Riffat Asim Pasha,Shahab Khushnood, M.Zubair Khan, Amir Sultan, Evaluation of Fatigue Behavior and Surface Characteristics of Aluminum Alloy 2024 T6 after Electric Discharge Machining (JMEP-16-09-11440), Journal of Materials Engineering and Performance, Submitted
30 Riffat Asim Pasha, Kamran Ghafoor, Fahad Mahmood, Salman Shahid, Zuhaib Jamil, Dr. M. Ali Nasir and Kashif M. Deen,, Influence of Plain And N2 Purging Conditions On Corrosion Mechanism Correlated With Microstructures of Low Alloy Steel Multipass Weldments, International Research Conference on Sustainable Energy, Engineering, Northumbria University in Newcastle Tyne (UK), (2017), pp. ,
31 Abbas Zulqarnain ,Abbas Muhammad, Pasha Riffat, Experional imental & Finite Element Analysis of Vibration based Piezoelectric Energy Harvesters, Journal of Chinese Institute of Engineers., Submitted
32 Zubair Butt, Riffat Asim PashaJ, Finite Element Simulation and Experimental studies of Barium Titanate (BaTiO3) Piezoelectric Material, Journal of Electronic Materials, Submitted
33 Din, Rafi ud; Shafqat, Qaisar; Zahid, Gulzar; Ahmad, Ejaz; Mahmood, Fahad; Syed, waqar; Pasha, Riffat; Nasir, Muhammad, Microstructural evolution, powder characteristics, compaction behavior and sinterability of Al 6061 - B4C composites as a function of reinforcement content and milling times, Journal of Materials Research, Submitted
34 5Shahid Mehmood, Riffat Asim Pasha and Amir Sultan, Effect of Electric Discharge Machining on Material Removal Rate and White Layer Composition, Mehran University Reserch Journal of Engineering & Technology, Vol. 36, No. 1, pp.
35 Jajja, S.A., Ali, W. and Ali, H.M., Multi Walled Carbon Nanotube Nanofluids for thermal management of high heat generating computer processors, Heat Transfer—Asian Research, Vol. 43, No. 7, (2014), pp. 653-666
36 Jajja, S.A., Ali, W. Ali, H.M. and Siddiqui, A.M, Water Cooled Mini Channel Heat Sinks for Microprocessor Cooling: Effect of Fin Spacing, Applied Thermal Engineering, Vol. 64, (2014), pp. 76-82
37 Ali, H.M., Khattak, Z., Ahmed, J., and Shah, S., CDM (Clean Development Mechanism) Investigation of WHR (Waste Heat Recovery) Unit (A Cement Plant Case Study), Information-An International Interdisciplinary Journal, Vol. 17, (2013), pp. 2765-2772
38 Ali, H.M and Abubaker, M., Effect of Vapour Velocity on Condensate Retention on Horizontal Pin-Fin Tubes, Energy Conversion and Management., Vol. 86, (2014), pp. 1001-1009
39 Ali, H.M and Ali, A., Measurements and Semi-Empirical Correlation for Condensate Retention on Horizontal Integral-Fin Tubes: Effect of Vapour Velocity, Applied Thermal Engineering., Vol. 71, No. 1, (2014), pp. 24-33
40 Ali, H.M and Briggs, A., A Semi-Empirical Model for Free-Convection Condensation on Horizontal Pin-Fin Tubes, International J. of Heat and Mass Transfer, Vol. 81, (2015), pp. 157-166
41 Ali, M., Vukovic, V., Sheikh, M. A. and Ali, H. M., Enhancement and Integration of Desiccant Evaporative Cooling System Model under Transient Operating Conditions, Applied Thermal Engineering, Vol. 75, (2015), pp. 1093-1105
42 Ali, M., Vukovic, V., Sheikh, M. A. and Ali, H. M., Performance Investigation of Desiccant Evaporative Cooling System Configurations in Different Climatic Zones, Energy Conversion and Management, Vol. 97, (2015), pp. 323-339
43 Noor, F., Imran, S., Ali, Z., Hussain, A., Ali, H. M. and Mehmood, S., Oxidation Behaviour of Nanoaluminum Particles in the Atmosphere of Air and Nitrogen,, Journal of the Pakistan Institute of Chemical Engineers (JPIChE), Vol. 43, No. 1, (2015), pp. 47-56
44 Ali, M., Vukovic, V., Ali, H. M. and Sheikh, M. A., Performance Analysis of Solar Assisted Desiccant Cooling System Cycles in World Climate Zones, Energy Conversion and Management., Submitted
45 Ali, H. M. and Briggs, A., Condensation of Ethylene Glycol on Pin-Fin Tubes: Effect of Circumferential Pin Spacing and Thickness, proceedings of ASME-ATI-UIT, Conference on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, (2010), pp. 1475-1480,
46 Ali, M, Ali, H.M, Moazzam, W and Saeed, M.B, Performance enhancement of PV cells through micro-channel cooling, WEENTECH Proceedings in Energy, Global Conference on Energy and Sustainable Development (GCESD), Technology Park Coventry University Coventry United Kingdom, 24- 26, February 2015 (2015), pp. 211-217,
47 Waqar Ahmed Qureshi, A Novel Approach for Automated Power Quality Improvement and Neutral Conductor Current Reduction, Proceedings of the International Conference on Information and Automation, Colombo, Sri Lanka, December 15-18, 2005 (2005), pp. 227-232,
48 Waqar Ahmed Qureshi, An Efficient Approach for Target Tracking and Error Minimization by Kalman Filtering Technique, Proceedings of IEEE International Conference on Electrical Engineering, , 11 – 12 April 2007 (2007), pp. 1-6,
49 Francesca Cura, Waqar Qureshi, Andrea Mura., A Methodological Approach for Incremental Fretting Wear Formation, Tribology Letters September 2016, Vol. 64, (2016), pp.
50 Waqar Qureshi, Francesca Cura, Andrea Mura., Experimental characterization of roughness parameters for fretting wear in spline couplings, Meccanica, (2016), pp.
51 Waqar Qureshi, Francesca Curá, Andrea Mura., Principal component analysis for characterization of fretting wear experiments on spline coupling., Procedia Engineering Italy., Vol. 109, (2015), pp. 73-79
52 Waqar Qureshi, Francesca Cura, Andrea Mura., Characterization of fretting wear experiments on spline couplings by principal component analysis., Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, (2016), pp. 73-79
53 Waqar Qureshi, Francesca Cura, Andrea Mura., Prediction of fretting wear in aero-engine spline couplings made of 42CrMo4., Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, (2016), pp.
54 Najam-ul-Hassan SHAH, Adeel ARSHAD, Azhar Abbas KHOSA, Hafiz Muhammad ALI, Muzaffar ALI, Thermal Analysis of a Mini Solar Pond of Small Surface Area while extracting Heat from Lower Convective Layer, Thermal Science - Online First, Vol. 2017, (2017), pp. 166-166
55 H. M.Ali, W.Arshad, Effect of Channel Angle of Pin-Fin Heat Sink on Heat Transfer Performance using Water based Graphene Nanoplatelets Nanofluids, International J. of Heat and Mass Transfer, Vol. 106, (2017), pp. 465-472
56 A.Arshad, H. M.Ali, M.Ali and S.Manzoor, Thermal Performance of Phase Change Material (PCM) based Pin-Finned Heat sinks for Electronics Devices: Effect of Pin Thickness and PCM Volume Fraction, Applied Thermal Engineering, Vol. 112, (2017), pp. 143-155
57 Ali, H. M., An Analytical Model for Prediction of Condensate Flooding on Horizontal Pin-fin Tubes, International J. of Heat and Mass Transfer, Vol. 106, (2017), pp. 1120-1124
58 Farooqi, M.I, Nasir, M.A, Ali, H. M. and Ali, Y., Experimental validation of transverse shear behavior of Nomex core for composite sandwich panels, Mechanics of Composite Materials, Vol. 53, No. 2, (2017), pp. 193-202
59 Arshad, W. and Ali, H. M., Graphene nanoplatelets nanofluids thermal and hydrodynamic performance on integral fin heat sink, International J. of Heat and Mass Transfer, Vol. 107, (2017), pp. 995-1001
60 Ali, H. M., Generous, M. M., Ahmad, F. and Irfan, M., Experimental Investigation of Nucleate Pool Boiling Heat Transfer Enhancement of TiO2-Water based Nanofluids, Applied Thermal Engineering, Vol. 113, (2017), pp. 1146-1151
61 Ali, H., Kamran, M. S., Ali, H. M. Imran, S., Farukh, F., and Wang, H. S., Marangoni Condensation of Steam-Ethanol Mixtures on a Horizontal Low-Finned Tube, Applied Thermal Engineering, Vol. 117, (2017), pp. 366-375
62 Khan, S. A., Ali, M., Shehryar, M., Tanzeel-Ur-Rashid, Khalil, M. S., Ali, H. M. and Gilani, S. I., Performance Analysis of a Low Capacity Solar Tower Water Heating System in Climate of Pakistan, Energy and Buildings, Vol. 143, (2017), pp. 84-99
63 Arshad, W. and Ali, H. M., Experimental Investigation of Heat Transfer and Pressure Drop in a Straight Minichannel Heat Sink with TiO2 Nanofluid, International J. of Heat and Mass Transfer, Vol. 110, (2017), pp. 248-256
64 Ali, H. M. and Arshad, A., Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices, International J. of Heat and Mass Transfer, Vol. 112, (2017), pp. 649-661
65 Ali, H. M., Zafar, M.A, Bashir, M.A, Nasir, M. A., Ali, M. and Siddiqui, A.M., Effect of Dust Deposition on the Performance of Photovoltaic Modules in Taxila, Pakistan, J. Thermal Science, Vol. 21, No. 2, (2017), pp. 915-923
66 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation+ stage I) of Aluminum Alloy under Combined Loading, Life Science Journal, Vol. 10, (2013), pp. 678-683
67 MUDASERULLAH, R. A. PASHA, R.A. RAHMAN and W. ASGHAR, FATIGUE LIFE ESTIMATION OF DIFFERENT WELDING ZONES OF OXY ACETYLENE WELDED ALUMINUM ALLOY (AA 5052-H32), Nucleus, Vol. 50, (2013), pp. 261-265
68 W ASGHAR, M A NASIR, F QAYYUM , M SHAH, M AZEEM, S NAUMAN and S KHUSHNOOD, Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE, Fatigue & Fracture of Engineering Materials & Structures, (2017), pp. published online
69 Muhammad A Nasir, Hina Akram, Zaffar M Khan, Masood Shah, Saad Anas, Zeeshan Asfar and Saad Nauman, Smart sensing layer for the detection of damage due to defects in a laminated composite structure, Journal of Intelligent Material Systems and Structures, (2014), pp.
70 Haroon Qaiser, Suniya Umar, Ali Nasir, Masood Shah & Saad Nauman, Optimization of Interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process, International Journal of Materials Forming, Springer, (2014), pp.
71 Saad Anas, Ghufran Ur Rehman, NoamanUl-Haq, Zaffar Muhammad Khan, Muhammad Bilal Khan, Saad Nauman, Muhammad Shahid, and Ali Nasir, Influence of MWCNTs as secondary reinforcement material in glass fiber/epoxy composites fabricated using VARTM, Applied Polymer Composites, Smithers Rapra, Vol. 2, No. 1, (2014), pp.
72 Muhammad Haris Ameer; Khubab Shaker; Munir Ashraf; Mehmet Karahan; Yasir Nawab; Sheraz Ahmad; Muhammad Ali Nasir, Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre reinforced composite materials, The Journal of The Textile Institute (TJTI), Vol. 108, No. 8, (2017), pp. 1-9
73 M. Arshad Javid, M. Rafi, Ihsan ali, Fayyaz hussain, M. Imran, Ali Nasir, Synthesis and study of structural properties of Sn doped ZnO nanoparticles, Materials Science-Poland, Vol. 34, No. 4, (2016), pp.
74 Waqas Aghar; Muhammad Ali Nasir; Faisal Qayyum; Masood Shah; Muhammad Azeem; Saad Nauman, and Shahab Khushnood, Investigation of Fatigue Crack Growth Rate in CARALL, ARALL and GLARE, Fatigue & Fracture of Engineering Materials & Structures, Wiley, Vol. 10, (2017), pp.
75 Rahim Jan; Amir Habib; Zaffar M Khan; Muhammad B Khan; Muhammad Anas; Ali Nasir; Saad Nauman, Liquid exfoliated Graphene smart layer for structural health monitoring of composites, Journal of Intelligent Material Systems and Structures, JIMSS ISSN: 1045-389X, (2016), pp.
76 M I. Farooqi, M. A. Nasir, H. M.Ali, Y. Ali, Experimental Validation of the Transverse Shear Behavior of a Nomex Core for Sandwich Panels, Mechanics of Composite Materials, Springer, Vol. 53, No. 2, (2017), pp. 193-202
77 R. A. Pasha, N. A. Choudary and M.A. Nasir, Fatigue Design and Validation of an ASME-Coded Pressure Vessel, Technical Journal, UET Taxila, Vol. 13, (2008), pp. 28-30
78 Rizwan Aziz, Riffat Asim Pasha, Muhammad Ali Nasir, Musharraf Abbas, Evaluation of optimal top coat thickness in composite LTA/YSZ thermal barrier coating by comparative stress distribution using finite element method, The Nucleus, Pinstech, Vol. 52, No. 4, (2015), pp. 146-150
79 Aysha Maryam SIDDIQUI, Waqas ARSHAD, Hafiz Muhammad ALI, Muzaffar ALI and Muhammad Ali NASIR, Evaluation of Nanofluids Performance for Simulated Microprocessor, Thermal Science Journal, (2015), pp.
80 M. Ullah, G. Y. Chohan, Q. Ali, M. A. Nasir, Microstructural Study & Assessment of Endurance limit through Numerical Simulation in TIG welded Aluminum Alloy (AA2219-T87), Technical Journal, UET Taxila, Vol. 20, (2015), pp. 61-68
81 M. A. Nasir, M. Ullah, Z. M. Khan, S. Nauman, S. Anas, R. A. Pasha, M. Shah, Tensile Strength changeability of Multilayered Composites, fabricated through Optimized “VARTM” Technology, An experimental Approach, Technical Journal 2015, UET Taxila, Vol. 20, (2015), pp. 54-60
82 Hafiz Muhammad ALI, Muhammad Abdullah ZAFAR, Muhammad Anser BASHIR, Muhammad Ali NASIR, Muzaffar ALI and Aysha Maryam SIDDIQUI, Effect of dust deposition on the performance of photovoltaic modules in Taxila, Pakistan, Thermal Science 2015, (2015), pp.
83 Rana Atta-ur-Rahman, M. Ali Nasir, et al, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science Journal, 2013, Vol. 10, (2013), pp.
84 Masood Shah, Catherine Mabru, Christine Boher, Sabine Leroux, Farhad Rezai-Aria, Crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, Advanced Engineering Materials - Wiley –VCH, Germany, Vol. 11, No. 9, (2009), pp. 746 - 749
85 M. Shah, C. Boher, S. Leroux, F. Rezai-Aria, C. Mabru, An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, Metallurgical Research & Technology, No. 3, (2009), pp. 140-146
86 Masood Shah, Catherine Mabru, Farhad Rezai-Aria, Ines Souki, Riffat Asim Pasha, An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verfication: case of FCGR of AISI H11 tool steel, Acta Metallurgica Sinica - English Letters, Vol. 24, No. 4, (2012), pp. 307-319
87 Amir Sultan, Riffat Asim Pasha, Mifrah Ali, Muhammad Zubair Khan, Muhammad Afzal Khan, Naeem Ullah Dar, Masood Shah, Numerical simulation and experimental verification of CMOD in SENT specimen: Application on FCGR of welded tool steel, Acta Metallurgica Sinica - English Letters, Vol. 26, No. 1, (2013), pp. 92-96
88 Samra Arooj, Masood Shah, Shahid Sadiq, Syed Hussain Imran Jaffery, Shahab Khushnood, Effect of Current in the EDM Machining of Aluminum 6061 T6 and its effect on the surface morphology, Arabian Journal for Science and Engineering, Vol. 39, No. 5, (2014), pp. 4187 - 4199
89 Ktari. A,Baccar. M,Shah. M,Haddar. N,Ayedi. HF, Rezai?Aria. F, A crack propagation criterion based on ?CTOD measured with 2D-digital image correlation technique, Fatigue and Fracture of Engineering Materials and Structures, (2014), pp.
90 F. Qayyum, M. Shah, S. Manzoor and M. Abbas, Comparison of thermomechanical stresses produced in work rolls during hot and cold rolling of Cartridge Brass 1101, Materials Science and Technology, (2014), pp.
91 Muhammad Ali Nasir, Zaffar Khan, Ilyas Farooqi, Saad Nauman, Saad Anas, Shahid Khalil, Asim Pasha, Zubair Khan, Masood Shah, Haroon Qaiser, Rana Ata, Transverse Shear Behavior of Nomex Core for Sandwich Panels, Mechanics of Composite Materials, (2014), pp.
92 A. Sultan, S. M. R. Shah, R. A. Pasha, Haris Ali, Asim Zulfiqar, Fatigue Crack Growth Behaviour of AISI 50100 Precipitation Hardened Steel after Welding, IBCAST 2010, Pakistan, January 11 – 14, 2010 (2010), pp. ,
93 M. Ali Raza Abid, M. Irfan Sarwar, Ahmad Tahir, Sayyid Masood Shah, M. Shehryar, Gas turbine blade flow analysis comparison using CFD and wind tunnel, IBCAST 2010, Pakistan, January 11 – 14, 2010 (2010), pp. ,
94 MASOOD SHAH, CATHERINE MABRU, CHRISTINE BOHER, SABINE LEROUX, FARHAD REZAI-ARIA, An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, 12th International Spring Meeting FATIGUE AND PLASTICITY: FROM MECHANISMS TO DESIGN, France, May 20-22, 2008 - Paris (2008), pp. ,
95 M. SHAH, C.MABRU, C. BOHER, S. LeRoux, F. Rezai-Aria, Crack propagation in X38CrMoV5 (AISI H11) tool steel, Tool 2009 - Tool Steels, Germany, June 2nd – 4th 2009 (2009), pp. ,
96 Masood Shah, Catherine Mabru, Farhad Rezai-Aria, Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures, Fatigue 2010, Procedia Engineering, Prague - Czech Republic, June 6 - 11, 2010 (2010), pp. 2045-2054,
97 M. BACCAR, M. SHAH, N. HADDAR, F. REZAI-ARIA, Investigation into the fatigue crack growth in hot work steel using crack tip opening displacement (DCTOD), First international congress on materials, environment and durability, Hammamet, Tunisia, 22-24 March, 2012 (2012), pp. ,
98 Masood SHAH*, Mifrah ALI, Amir SULTAN, Muhammad MUJAHID, Haroon MEHMOOD,Naeem Ullah DAR, Mohammad SHUAIB, An Investigation into the Fatigue Crack Growth Rate of Electron Beam Welded H13 Tool Steel: Effect of Welding and Post Weld Heat Treatment, Metallography, Microstructures and Analysis, Vol. 3, No. 2, (2014), pp. 114-125
99 S. Hayat, A Khan, M Shahid Khalil, Evaluating Effectiveness of Tamper-Proofing on Dynamic Graph Software Watermarks, International Journal of Computer Science and Information Security, (2009), pp. Pages 1-9
100 Aihab Khan, M Shahid Khalil, Design and Implementation of Human Computer Interface System Based on Eye Movement Tracking, International Journal of Human-Computer Interaction, (2009), pp.
101 Q. Iqbal, S Khushnood, M A Qureshi, M. Shahid. Khalil, G. Y. Chohan, Modeling Of Thermal Damping in a Multi-Span Tube Bundle, Kuwait Journal of Science and Technology,, (2009), pp.
102 N K Raja, M. Shahid. Khalil, Design And Fabrication Of An Economic Model For Sustainable Development Of Solar Energy Technology In Pakistan, International Journal of Green Energy, United Kingdom, (2009), pp.
103 M Abid, M. Shahid Khalil, Implementation of Integrated Process Plan for an artificial hip implant - A Case Study’, SADHANA Academy Proceedings in Engineering Sciences. SADH-D-08-0038, Under Review
104 Sajjad Akbar, M Shahid Khalil, Quality of Health Care for Industrial Employees, New Horizons, International Research Journal, Green University, No. 2, (2009), pp.
105 Liaquat Khan, M Shahid Khalil, Thermo economic Lifecycle cost Optimization of a shell and tube heat exchanger using evolutionary algorithms, International Journal of Computing and Fluid Dynamics, (2009), pp.
106 N Raja, M. Shahid Khalil, Manufacturing Of Parabolic Trough Solar Collector System For A Developing Country Pakistan, Open Renewable Energy of International Journal, (2009), pp.
107 M Shahid Khalil, Ashraf Butt, Applying Taguchi loss function to Textile sector of Pakistan, International Journal of Industrial Engineering and Management, (2009), pp.
108 Nusrat Kamal Raja, M. Shahid Khalil, Design and Manufacturing of Parabolic Trough Solar Collector System for a Developing Country Pakistan, International Journal of Green Energy, United Kingdom, (2009), pp.
109 M. Shahid Khalil, Hafiz Ihsanullah, Implementation of quality improvement tools in brass industry to improve quality & enhance productivity, International Journal of Quality Improvement, (2009), pp.
110 Aihab Khan, M Shahid Khalil, Effect of Pesticides on Human Life through Visual Data Mining, The Journal of Theoretical and Applied information Technology, (2010), pp.
111 A Khan, M Shahid Khalil, Sikandar Khyal, Online Credit Card Fraud Prevention System for Developing Countries, International Journal of Revision and Computing, (2010), pp.
112 Irfan Mirza, S Aqeel, M Shahid Khalil, Pakistan Wind Risk Concept For Development Of Wind Energy In Emerging Markets, International Journal of the Political, Economic, Planning, Environmental and Social Aspects of Energy, Elsevier Editorial System, (2010), pp.
113 M Amin, M Shahid Khalil, Sajjad Akbar, Optimal surface quality of complex contour jobs through Multi-axis CNC milling and response surface method, International Journal of Precision Engineering, Elsevier Editorial System, (2010), pp.
114 M Rizwan Khan, M Shahid Khalil, Mass customizing a job shop environment, International Journal of Mass Customization, Elsevier Editorial System, (2010), pp.
115 M Abid, M Shahid Khalil, Micromechanics of Kevlar 49/Epoxy Composites: Estimation of Elastic Constants and Effect of Fiber Volume Fraction using FEM Analysis, International Journal of Mechanical Engineering, (2010), pp.
116 I Ramay, M Shahid Khalil, M Bilal, Employees’ performance and HRM practices : Study of banking sector in Pakistan, International J of HRM practices, (2010), pp.
117 I Ramay, M Shahid Khalil, Mohsin Ali, Job satisfaction (antecedents and out comes) : Hospitals in Islamabad / Rawalpindi, Interl J of Manangement practices, (2010), pp.
118 I Ramay, M Shahid Khalil, K Bashir, Antecedents of organizational commitment A study of financial managers of Pakistan, Interl J of Financial Management, (2010), pp.
119 I Ramay, M Shahid Khalil, K Bashir, Antecedents of organizational citizenship behavior, A study in telecom sector J Communication and its Management, (2010), pp.
120 I Ramay, M Shahid Khalil, B Sultan, Antecedents of organizational learning: A study in telecom sector, J Communication and its Management, (2010), pp.
121 I Ramay, M Shahid Khalil, M Usman, Consequences of organizational commitment: A study of financial sector of Pakistan, J Human Resource and its Practices, (2010), pp.
122 Abida Ellahia, M. Shahid Khalil, Fouzia Akrama, Computer users at risk, Health disorders associated Journal of Business Management and Economics with prolonged computer use, (2011), pp. 171-182
123 Khalid Hashmi, M Shahid Khalil, Design and development of a dynamometer for high speed milling operations, Advanced Science Letter (ASL) American Scientific Publishers, (2012), pp.
124 M. Waheed, Zahid Khan, M Shahid Khalil, Creative learning environment and knowledge management, International Journal of Academic Research in Business and Social Sciences, No. 1, (2012), pp.
125 M Shahid Khalil, Khalid Hashmi, Measurement and Analysis of forces during High speed milling of EN30Alloy Steel, J of high speed machining, (2012), pp.
126 Khalid Hashmi, M Shahid Khalil, Design development and calibration of a dynamometer for high speed milling operations, Advanced Science Letter (ASL) American Scientific Publishers, (2012), pp.
127 M Shahid Khalil, Measurement and Analysis of Forces during High Speed Milling of EN-30B Alloy Steel, Journal of Basic and Applied Scientific Research, (2013), pp. 888-895
128 M Shahid Khalil, Evaluation and prioritization of key parameters for high speed machining of Titanium Alloys, Life Science Journal, (2013), pp. 124-130
129 M Shahid Khalil, Deformation Investigations of Weld Based Rapid Prototyping, Research Journal of Applied Sciences, Engineering and Technology, Under Review
130 M Shahid Khalil, A Novel Approach for Welding Dissimilar Metals with Enhanced Galvanic Corrosion Resistance, Journal of Wuhan University of Technology-Master.Sci.Ed, (2013), pp.
131 M Shahid Khalil, Parametric Study of “CDS” Thin Films Produced Using Chemical bath Deposition Process for Application as Buffer Layer, Advances in Materials Science and Engineering, (2013), pp.
132 M Shahid Khalil, Difficulty faced by working women. A study of banking sector of Islamabad , Pakistan, Asian Journal of research in banking and finance, (2013), pp.
133 M Shahid Khalil, Nasir Kaleem Zafar, Application of six sigma for enhancing mean time between failure of fuel accessories of turbo jet engines, Review of social studies, Law and Psychology, (2013), pp.
134 M Shahid Khalil, Comparison of Performance Measurements of Photovoltaic Modules during Winter Months in Taxila, Pakistan, International Journal of Photo Energy, Under Review
135 M Shahid Khalil, Nasir Kaleem Zafar, Application of six sigma for enhancing mean time between failure of fuel accessories of turbo Jet engines, Greece International Multidisciplinary Academic Conference, (2013), pp.
136 M Shahid Khalil, Sajjad Akbar, Assessment of life of pressure vessels and pipes in crude oil and gas industries in Pakistan, International ASME power 2013 conference, July 29-Aug 1, 2013, Boston, Manssachusetts, (2013), pp.
137 M Shahid Khalil, Experimental Based Tensile Strength Variability of Multilayered Composites, Fabricated via. Optimized “VARTM” Technology, IBCAST, (2014), pp.
138 Liaquat A Khan, M Shahid Khalil, Thermo economic Lifecycle Energy Recovery System Optimization For Central Air- Conditioning System Using Evolutionary Technique, Mehran University Research Journal of Engineering and Technology, September, (2009), pp.
139 Liaquat A Khan, F Mahfooz, M Shahid Khalil, Exergetic Lifecycle cost optimization of a shell and tube heat exchanger, Mehran University Research Journal of Engineering and Technology, No. 4, (2009), pp. 419-428
140 Sajjad Akbar, M Shahid Khalil, Economic of indigenous technical development, Journal of Research and Bussiness strategies, Zabist University, Karachi, (2009), pp.
141 Shahzad Ali Khan,. M Shahid Khalil, Sajjad Akbar, Sick, Poor, Private worker; low quality healthcare Services for the private industrial employees in Pakistan, Journal of Mehran University, Jamshoro, (2009), pp.
142 Hussain, M Shahid Khalil, Analysis and investigation methods for Boiler Tube Failure, Proceedings of the 3rd International conference on Aerospace Science and Engineering Islamabad, Pakistan (ICASE 2013), August 21-23, (2013), pp.
143 M Shahid Khalil, Shahzad Ali Khan, Behavior of man, not machines, causes machine injuries, First Regional Conference on Injury Prevention and Safety Promotion, Cairo, Egypt, 10-12, , 10-12 February 2009 (2009), pp. ,
144 M. Shahid Khalil, Shahzad Ali Khan, Road Design and Furniture: important determinants of road safety, First Regional Conference on Injury Prevention and Safety Promotion, Cairo, Egypt, 10- 12, Cairo, Egypt., 10-12 February 2009 (2009), pp. ,
145 Sajjad Akbar, M. Shahid Khalil, Protection and Monitoring of Ionizing Radiation- nuclear medicine, 17th International conference on Nuclear Engineering (ICONE-17) July 15 – 21, , (2009), pp. ,
146 Bashir, M. Shahid Khalil, S Akbar, Detailed engineering customization – a cost and time effective approach in the manufacturing of steel structures, 17th International conference on Nuclear Engineering (ICONE-17), July 15 – 21, , (2009), pp. ,
147 M. Shahid Khalil, S. Akbar, Friction Welding of Mild Steel Components, 17th Intl conf on Nuclear Engineering (ICONE-17), July 15 – 21, , (2009), pp. ,
148 M. Shahid Khalil, Waqas Ahmad, Influence of local culture for the in the development of quality, 16th ACPQO’s International conference of Quality 17-19 September, 2010, University of Khatmandu, Nepal, University of Khatmandu, Nepal, (2010), pp. ,
149 Altaf Khan, M Shahid Khalil, Natural Gas crises and its probable solution, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
150 M Shahid Khalil, A. Janjua, Utilization of Renewable energy potential in Pakistan : A goal oriented approach through industry cum academia linkage, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
151 Irfan Mirza, M Shahid Khalil, Risk energy management in the power generation through wind energy, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
152 Kashif Nawaz, M Shahid Khalil, A study of the relationship between precision machining and parameters of an offset beam slotted antenna, Proceedings of the IBCAST conference, Islamabad, , (2010), pp. ,
153 M. Shahid Khalil, N Raja, Design And Manufacturing Of Parabolic Trough Solar Collector System For A Developing Country Pakistan, Renewable Energy World Conference, Japan, (2010), pp. ,
154 M Shahid Khalil, Sajjad Akbar, Management of Aging and Fatiguing for Nuclear Power Plants (NPP), ASME 2010 International Mechanical Engineering (IMECE 2010), November, 11-18 2010, Canada, (2010), pp. ,
155 M. Shahid Khalil, Sajjad Akbar, Life Assessment of Pipes & Pressure Vessels of a Petro-Chemical Plant, International Conference & Exhibition ICONE 20, 30th July – August 3, 2012, Anaheim, California, USA, pp. ,
156 Amar Mehdi, M. Shahid Khalil, Asnaf Qadar, Increasing Productivity in a Manufacturing Organization by implementation of Six Sigma: a Case Study, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
157 Amar Mehdi, M. Shahid Khalil, Asnaf Qadar, Increasing Productivity in a Manufacturing Organization by implementation of Six Sigma: a Case Study, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
158 M. Shahid Khalil, Tariq Yasin, Chemical milling for Aerospace structures, Proceedings of the IMEC 2010, Sept 27-28, 2010, UET Taxila, pp. ,
159 Baharul Amin, M Shahid Khalil, Selection of steam jet ejector for vacuum genration in cross flow surface condenser, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
160 M Nadeem Khan, M Shahid Khalil, Vertical Transportation System in High Rise Building, Proeedings of the IMEC 2010, Sep 27-28, Taxila, (2010), pp. ,
161 M. Rizwan Anwar, M Shahid Khalil, Effects of Spindle Speeds on Wear and Tear of Cutting Tools, Object geometry and Machining processes, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
162 Ali Raza, M Shahid Khalil, Optimum performance under varying stress environment in a typical industrial setup, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, (2010), pp. ,
163 Irshad Faisal, M Shahid Khalil, Economics of Aluminum Scrap Recycling at PAC KAMRA, Proc of the IMEC 2010, Sep 27-28, 2010, UET Taxila, (2010), pp. ,
164 M. Abid, M. S. Khalil, Performance of a gasketed flange joint under combined internal pressure, axial and thermal loading, Proceedings of the IMEC 2010, October 27-28, 2011, UET Taxila, (2010), pp. ,
165 Yamin Younis, Atiqa Bibi, Anwar-ul-Haque, Khushnood. S, Vortical Flow Topology on Windward and Leeward side of Delta Wing at Supersonic Speed, Journal of Applied Fluid Mechanics, (2009), pp.
166 Khushnood. S, Zaffar M. Khan, M.Afzaal Malik, Qamar Iqbal, Sajid Bashir, Muddasar Khan, Zafarullah Koreshi, Mahmood Anwar Khan, Tahir Nadeem Malik & Arshad Hussain Qureshi, Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles, Journal of Nuclear Engineering and Design, Reference NED-D-09-00288, (2010), pp.
167 Muddasar Khan, Cesar Levy, Amer Hameed, Zulfiqar Khan, Khalid Orakzai, Musarrat Khan, Khuram Shahazad, Afzaal M. Malik & Khushnood. S, An Analysis of Dome Reversal in Metal Beverage Container Based on Finite Element Methods, Journal of Structural Durability & Health Monitoring, SDHM, (2010), pp. 1-15
168 Haider Abbas, Khushnood. S, Fostering R&D Performance using Knowledge Management, African Journal of Business Management, AJBM-11-115, (2011), pp.
169 A.H Mailk, M.S.I. Alvi, Khushnood. S, F.Mahfooz, K.K. Ghauri, A.Shah, Esperimental study of conjugate heat transfer within a bottom heated vertical concentric cylindrical enclosure, International Journal of Heat & Mass Transfer, (2011), pp. 1154-1163
170 Shahab Khushnood et al., Chapter Titled, Cross-Flow-Induced-Vibrations in Heat Exchanger Tube Bundles: A Review, Book Titled "Nuclear Power Plants, (2012), pp. 71-128
171 M.J. Iqbal, N.A. Sheikh, H.M. Ali, S. Khushnood, M. Arif, Comparison of Empirical Correlations for the Estimation of Conjugate Heat Transfer in a Thrust Chamber, Life Science Journal 2012, Vol. 9, (2012), pp. 708-716
172 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, Tasneem Shah, Arshad Qureshi, Optimal Energy Recovery from ammonia Synthesis in a Solar Thermal Power Plant, Arabian Journal for Science and Engineering, AJSE-D-11-00559R2 (2012), (2012), pp.
173 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, Tasneem Shah, Arshad Qureshi, Simulation of Ammonia Synthesis for Optimal Energy Recovery in a Once-Through Plug Flow Reactor, Arabian Journal for Science and Engineering, AJSE-D-11-01344R1, Under Review
174 Masood Shah, Samra Arooj, Shahid Sadiq, Syed Hussain Imran Jaffery, Shahab Khushnood, Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology, The Arabian Journal for Science and Engineering – AJSE-D-12-02114, (2013), pp.
175 K.M.Khan, S.Khushnood, Numerical Simulation of Aero-spike nozzle in-viscid Isentropic Flow-Field, Life Science Journal, Vol. 10, (2013), pp.
176 Syed Gul Hassan Naqvi, Syed Thar Masood, Shahab Khushnood, Ali Rzwan, Mirza Jahanzaib,, The Rollover Prediction and Prevention of Bullet Proof Vehicles for Improved Stability, Life Science Journal, Vol. 10, (2013), pp.
177 Abu Bakar Izhar, Arshad Hussain Qureshi and Shahab Khushnood, Simulation of Vortex Induced Vibrations of A Cylinder Using ANSYS CFX, Journal – China Ocean Engineering, (2013), pp.
178 Asif Hussain Malik, Shahab Khushnood and Ajmal Shah, Experimental and Numerical Study of Buoyancy Driven Flow within a Bottom Heated Vertical Concentric Cylindrical Enclosure, Journal – Natural Science, Scientific Research Open Access, (2013), pp.
179 Azhar Munir, S. Khushnood, Naveed, Effect of Material Flaws on Structural Dynamics & Aero-Elastic Analysis of a Low Carbon Steel Plate, Arabian Journal of Science & Engineering, Under Review
180 Luqman A. Nizam, S. Khushnood, Masood Shah, S. Manzoor, Muhammad Atif Niaz, Muhammad Usman & Aneela Anum, Experimental Analysis of Cross-Flow-Induced-Vibrations in Heat Exchanger Tube Bundle, Nulcear Engineering & Design, Under Review
181 Khushnood. S, Qamar Iqbal, Techniques for Thermal Damping in Tube Bundles, Mehran University Research Journal of Engineering & Technology, (2009), pp.
182 K. Shehzad and S. Khushnood, A New Technique to Improve Comprehensibility in Inductive Learning, Technical Journal, University of Engineering & Technology Taxila,, (2010), pp. 56-64
183 S. Siddiq, S. Khushnood, Z.U. Koreshi and M.T Shah, Solar Thermal Energy Storage using Liquid Ammonia Systems in Industry, NUST Journal of Engineering Sciences, (2010), pp. 53-58
184 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, and Tasneem Shah, Process Simulation of Ammonia Synthesis for Increasing Heat Recovery in a Thermal Storage Plant: A Review, Technical Journal, University of Engineering & Technology, Taxila, (2011), pp. 68-91
185 Khushnood. S,, Metallurgy and Heat Treatment, Publisher National Book Foundation, Ministry of Education, Pakistan, (2012), pp.
186 Sajid Bashir, M. Anwar Khan, Khushnood. S, Vibration analysis of gas turbine blade using Finite Element Method, Technical Journal, University of Engineering and Technology, Taxila, (2012), pp.
187 Sajid Bashir, M. Anwar Khan, Khushnood. S, Effects of humidity and backspin in spherical bodies moving in compressible fluid, Technical Journal, University of Engineering and Technology, Taxila, (2012), pp.
188 Z.U. Hassan, M.M.I. Hammouda, S. Khushnood, K. Akhtar, M. Jahanzeb and A. Malik, Experimental and Numerical Analysis of Fretting Fatigue Crack Initiation in Dovetail Joint for Aero Engine Compressor, A quarterly Scientific Journal of Pakistan Atomic Energy Commission, NCLEAM, (2012), pp. 255-264
189 Azhar Munir, S. Khushnood & N. Ahmed, 2013, Effect of Material Flaws on the Modal Parameters of Isotropic Material using Ground Vibration Testing, The Nucleus, (2013), pp. 189-207
190 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, A Comparative Parametric Study of Single Step and Double Step Swage Autofrettage in Swaged Metal Tubes, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17), Brussels, Belgium, (2009), pp. ,
191 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, Modeling and Simulation Of Multistage Autofrettage in Pressure Vessels, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17) July 12-16, Brussels, Belgium, (2009), pp. ,
192 Muddasar Khan, Khushnood. S, Afzaal Malik, Sajid Bashir and Musarrat Khan, On The Optimum Flow-Induced Vibration of A Tube In Heat Exchanger Tube Bundle, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17) Brussels, Belgium, Brussels, Belgium, (2009), pp. ,
193 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, A Parametric Study of Catastrophic Failure in Metal Tubes Subjected to Single and Double Step Swage Autofrettaged, IRF'2009 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal, 20-24 July 2009 (2009), pp. ,
194 Afzaal M. Malik, Sabeeh H. Raza, Muddasar khan, and Khushnood. S, Analysis of Vibratory Stresses in a Turbine Blade using Surface Coating, IRF'2009 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal, (2009), pp. ,
195 J.S.Bhatti, R.A.Pasha, Finite Element Based Design of Piezoelectric Vibration Damper, Key Engineering Materials, (2010), pp. 431-437
196 Nadeem Ahmed, Riffat Asim Pasha, MMI Hammouda, Temperature Effects on Impact Energy of Tungston Alloy, Advanced Materials & Processes, (2011), pp. 35-37
197 Amir Sultan, Riffat Asim Pasha, Sayyid Masood Ur Rehman Shah, Haris Ali, Asim Zulfiqar, Fatigue Crack Growth Behaviour of AISI 50100 Precipitation Hardened Steel after welding Comparison of Welded and Base Metal in 1045 Steel, Advanced Materials for Applied Science and Technology II, (2012), pp. 9-14
198 Masood Shah; Catherine Mabru; Farhad Rezai-Aria; Ines Souki; Riffat Asim Pasha, An Estimation of Stress Intensity Factor in a Clamped SE(T) Specimen Through Numerical Simulation and Experimental Verification, Case of FCGR of AISI H11 Tool Steel, Acta Metallurgica Sinica(English Letters), (2012), pp. 307-319
199 Amir Sultan, Riffat Asim Pasha, Masood ur Rehman, M.Zubair Khan, M. Afzal Khan,Naeem Ullah Dar, Numerical simulation and experimental verification of CMOD in SE(T) specimen, Application on FCGR of welded tool steel accepted for publication in Acta Metallurgica Sinica (English Letters), (2012), pp.
200 Riffat Asim Pasha, M.Z.Khan, Thermal Shocking of a Thin Lead Zirconate Titanate Piezoelectric Ceramics disc, Proceedings Pakistan Academy of Science, Vol. 46, (2009), pp. 47-52
201 Riffat Asim Pasha Zahid Suleman and M. Z. Khan, Analysis of Thickness Effect on Piezoelectric Beam, Technical Journal, UET Taxila (2009), Vol. 14, (2009), pp. 50-54
202 Riffat Asim Pasha, Muhammad Zubair Khan, Effect of Thermal Shocking and Quenching on the Degradation Behaviour of a Thin PZT Disc, Pakistan Journal of Scientific and Industrial Research,2010, Vol. 53, (2010), pp. 1-5
203 Riffat Asim Pasha, Gulistan Raja, Effect of Frequency ad Resistance by Temperature Variation on Lead Zirconate Titanate Piezoelectric Ceramics disc, The Nucleus (2011), (2011), pp. 191-197
204 Riffat Asim Pasha, Talal Ahmed, Determination of orthotropic mechanical property of honeycomb core: a comparative analysis, The Nucleus 2012, (2012), pp. 79-87
205 Riffat Asim Pasha, Khalil-ur Rehman, Masood Shah, Determination And Demarcation Of Fatigue Crack Initiation Phase In Rotating Bending Condition, The Nucleus 2012, (2012), pp. 165-169
206 A. T. Jarral M.Ali ,M.H Sahir,R.A Pasha,Design, Optimization And Analysis Of Vertical Axis Wind Turbine Blade, The Nucleus 2012, (2013), pp. 7-12
207 A. T. Jarral ,R.A Pasha, Measurement and Supperssion of cutting tool vibration using Piezoelectric ceramic in ANSYS, The Nucleus 2012, (2013), pp. 149-153
208 A.Hameed, R.A Pasha, A.R. Khan, M.Z.Khan and M.Shah, To investigate the effect of heat treatment on fracture toughness of welded joints, The Nucleus (2013) 50, (2013), pp. 165-172
209 R.A Pasha, 16. Fatigue Life Estimation of Different Welding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32),, The Nucleus 2013, (2013), pp. 261-265
210 17. Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science journal, (2013), pp. 1-6
211 Tayyaba Bano, Nadeem Ahmed Sheikh, S. Manzoor, Shahab Khushnood, Numerical Simulation of Flow past a Square Cylinder, IEEE- IBCAST 2012, Islamabad., Islamabad, (2012), pp. ,
212 Ali, H. M. and Briggs, A, Condensation of R-113 on Pin-Fin Tubes: Effect of Circumferential Pin Thickness and Spacing, J. of Heat Transfer Engineering., (2012), pp. 205-212
213 Ali, H. M. and Briggs, A., Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Circumferential Pin Thickness and Spacing, J. of Applied Thermal Engineering, (2012), pp. 9-13
214 Ali, H. M. and Briggs, A, Enhanced Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Pin Geometry, ASME J. of Heat Transfer., (2012), pp.
215 Iqbal, M.J, Sheikh, N.A, Ali, H. M. et al., Comparison of empirical correlations for the estimation of conjugate heat transfer in a thrust chamber, Life Science Journal, (2012), pp. 708-716
216 Ali, H. M. and Briggs, A, Condensation Heat Transfer on Pin-Fin Tubes: Effect of Thermal Conductivity and Pin Height, J. of Applied Thermal Engineering, (2013), pp. 465-471
217 Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M, An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Online, J. of Thermal Science., (2013), pp.
218 Jajja, S.A., Ali, W. and Ali, H.M, Nanofluids for thermal management of high heat generating computer processors, Accepted, J. of Heat Transfer - Asian Research, (2013), pp.
219 Khattak, Z., Ahmed, J., Ali, H.M. and Shah, S, Contemporary Dust Control Techniques in Cement Industry, Electrostatic Precipitator – A Case Study, World Applied Sciences Journal, (2013), pp. 202-209
220 Ali, H. M. and Briggs, A, Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Circumferential Pin Geometry, 11th UK National Heat Transfer Conference, London, UK., London, UK., (2009), pp. ,
221 Ali, H. M. and Briggs, A, Condensation of Ethylene Glycol on Pin-Fin Tubes, Effect of Circumferential Pin Spacing and Thickness, proceedings of ASME-ATI-UIT Conference on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, (2010), pp. 1475-1480,
222 Ali, H. M., A Hassan and A Briggs, Enhanced Condensation of Ethylene Glycol on Three-Dimensional Pin-Fin Tubes, 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13 2010 (2010), pp. 11-17,
223 Ali, H. M. and Briggs, A, Effect of Tube Material on Condensation Heat Transfer on Pin-Fin Tubes, Proc. 12th U.K. Nat. Conf. on Heat Transfer, Leeds., , (2011), pp. ,
224 Briggs, A. and Ali, H.M, Surface Tension Enhanced Heat Transfer During Condensation on Finned Surfaces, 7th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China., Xi'an, China, (2012), pp. ,
225 Ali, H. M. and Briggs, A., An investigation of Condensate Retention on Pin-Fin Tubes, Proc. of the World Congress on Engineering 2013 (WCE 2013),, Imperial College, London, UK, July 3-5 2013 (2013), pp. 1941-1946,
226 Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M, An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Proc. of the International Symposium on Innovative Materials for Processes in Energy Systems 2013 (IMPRES2013), Fukuoka, Japan., Sep. 4-6 2013 (2013), pp. ,
227 M.Schwartz, S.Manzoor, P.Hémon, E. de Langre, By-pass Transition to Airfoil Flutter by Transient Growth due to Gust Impulse, Journal of Fluids and Structures, Vol. 25, (2009), pp. 1272-1281.
228 S.Manzoor, P.Hémon, On the aeroelastic transient behaviour of a streamlined bridge deck section in a wind tunnel, Journal of Fluids and Structures, Vol. 27, (2011), pp. 1216 – 1227
229 Nadeem A. Sheikh, S. Manzoor, A Modified Non-Linear Model for the High Mass Ratio Square Cylinder, Journal of Fluids and Structures, (2012), pp.
230 S. Manzoor, Jawad Khawar, Nadeem Ahmed Sheikh, Vortex Induced Vibrations Of A Square Cylinder With Damped -Free End Conditions, Advances in Mechanical Engineering, 2013, (2013), pp.
231 X. Amandolese, P. Hémon and S. Manzoor, Transient temporal response of a flexible bridge deck submitted to a single gust, Journal of Computational and Applied Mathematics, (2012), pp.
232 Nadeem Ahmed Sheikh, S. Manzoor, Usman Ghani, Evaluating energy flux in vibro- fluidized granular bed, Advances in Mechanical Engineering doi 10.1155/2013/327379., (2013), pp.
233 S. Manzoor, Jawad Khawar, Nadeem Ahmed Sheikh, Vortex induced vibrations of a square cylinder with damped – free end conditions, Advances in Mechanical Engineering, doi 10.1155/2013/204974, (2013), pp.
234 X. Amandolese, P. Hémon, S. Manzoor, The transient temporal response of a flexible bridge deck subjected to a single gust, Journal of Computational and Applied Mathematics, Vol. 246, (2013), pp. 153 – 160
235 S.Manzoor, P.Hémon, X.Amandolèse, Vortex Induced Vibrations of a Square Cylinder. ASME, 3rd FEDSM 2010 Montreal, Canada, Canada, (2010), pp. ,
236 M. Shehryar, P. Hemon, Transient Behavior of a Streamlined Bridge Deck Section in a Wind Tunnel., 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
237 T Bano, N A Sheikh, S. Manzoor, S. Khushnood, Numerical Simulation of Flow past a Square Cylinder, 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
238 M A R Abid, M I Sarwar, A Tahir, M A Khan, M Shehryar, S M Shah, , Gas Turbine Blade Flow Analysis Comparison using CFD and Wind Tunnel, 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
239 X. Amandolèse, P. Hémon, S. Manzoor, Transient Temporal Response of a Flexible Bridge Deck Submitted to a Single Gust, 5th International Conference on Advanced Computational Methods in Engineering (ACOMEN – 2011), , (2011), pp. ,
240 Muzaffar Ali , Vladimir Vukovic, Mukhtar Hussain Sahir , Guiliano Fontella, Energy analysis of chilled water system configurations using simulation-based optimization, Energy and Buildings, Vol. 59, (2013), pp. 111-122
241 Muzaffar Ali , Vladimir Vukovic, Mukhtar Hussain Sahir , Daniele Basciotti, Development and validation of a desiccant wheel model calibrated under transient operating conditions, Applied Thermal Engineering, Vol. 61, (2013), pp. 469-480
242 Muhammad Anser BASHIR1, Hafiz Muhammad ALI, Muzaffar ALI1 and Aysha Maryam SIDDIQUI2, An experimental investigation of performance of photovoltaic modules in Pakistan, Thermal Science International Journal, (2013), pp. 134-134
243 Muzaffar Ali, Vladimir Vukovic, Automated optimization of HVAC system configurations, 41st International Conference on HVAC&R, Belgrade,Serbia, December 1-3, 2010 (2010), pp. ,
244 Muzaffar Ali, Vladimir Vukovic, HVAC system configurations, Energy Conference, June 2010, Vienna, Austria., (2010), pp. ,
245 Muzaffar Ali, Vladimir Vukovic, Performance investigation of desiccant wheel, Energy Conference,, Vienna, Austria., July 2011 (2011), pp. ,
246 MUDASERULLAH, R. A. PASHA, R.A. RAHMAN and W. ASGHAR, FATIGUE LIFE ESTIMATION OF DIFFERENT WELDING ZONES OF OXY ACETYLENE WELDED ALUMINUM ALLOY (AA 5052-H32), Department of Mechanical Engineering, University of Engineering and Technology, Taxila, Pakistan, No. 3, (2013), pp. 261-265
247 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, 2. Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading., Life Science Journal 2013, (2013), pp.
248 ali NASIR, Zaffar KHAN, Saad NAUMAN, Saad ANAS, Asim PASHA, Moin AHMAD, Shahid KHALIL, Masood SHAH, Mudaser ULLAH,Rana ATTA, M.SHAHID, Experimental Based Tensile Strength Variability of Multilayered Composites, Fabricated via. Optimized “VARTM” Technology, 1. Department of Mechanical and Aeronautical Engineering, University of Engineering and Technology, Taxila, Pakistan, (2013), pp.
249 R.A. Jabbar, S.A. Qureshi, M. Akmal, W.A. Qureshi, and A. Ahmad, Practical Analysis and Mathematical Modeling of Harmonic Distortions Caused by Electronic Loads, Proceedings of the Seventh IASTED International Conference, Power and Energy Systems, Palma de Mallorca, Spain, 29/08/2007 (2007), pp. PP 151-156,
250 Muhammad Ammar Mehdi, Nabi Ahmed, Tanzeel ur Rashid, Six Sigma Implementation In A Manufacturing Organization, Technical Journal, University of Engineering and Technology Taxila, (2007), pp. 58-63
251 Muhammad Ammar Mehdi, Tanzeel ur Rashid, Lean Six Sigma: An Overview for developing countries, POM-2006, Shangahi,China, (2006), pp. ,
252 Waqas Anwar, Nazeer Ahmad Anjum, Usage of Crack Growth Prediction Software Codes for Life Assessment of Aerospace Structures, FEMS, UET Taxila, 22 - 23 Oct (2007), pp. 198-204, UET Taxila
253 Waqas Anwar, Dr. M. Zubair Khan, Nazeer Ahmad Anjum, Monitoring of Crack Growth Behavior in Aerospace Grade Materials Using Notched Specimen, IBCAST, NCP Islamabad, (2008), pp. , IBCAST
254 Ghulam Mustafa,Jin Ho Kim,Nazeer Ahmed Anjum, Structural Design and Optimization of 7.5MW Wind Turbine Blade under Fatigue Loading, IBCAST, NCP Islamabad, January 11th – 14th (2010), pp. 17-22, IBCAST
255 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science, (2014), pp. 1-6
256 Muzaffar Ali, Vladimir Vukovic, Mukhtar Hussain Sahir, Giuliano Fontanella, Energy analysis of chilled water system configurations using simulation-based optimization, Energy and Buildings, Vol. 59, (2013), pp. 111-122
257 Muzaffar Ali ,Vladimir Vukovic , Mukhtar Hussain Sahir , Daniele Basciotti, Development and validation of a desiccant wheel model calibrated under transient operating conditions, Applied Thermal Engineering, Vol. 61, (2013), pp. 469-480
258 Bashir Muhammad Anser, Ali Hafiz Muhammad, Ali Muzaffar, Siddiqui Aysha Maryam, An experimental investigation of performance of photovoltaic modules in Pakistan, Thermal Science International Journal, (2013), pp. 134
259 Sana Zulfiqar, Asif Israr, Ilyas A. Huqqani, An Approximate Solution Technique of Nonlinear Vibration of Partially Cracked Plates Using Higher Order Perturbation Method, 2nd International Conference on Aerospace Science & Engineering (ICASE), Institute of Space Technology, Islamabad, Dec. 28-30, 2011 (2011), pp. ,
260 Amir Sultan, Riffat Asim Pasha, Masood ur Rehman, M.Zubair Khan, M. Afzal Khan,Naeem Ullah Dar,, Numerical simulation and experimental verification of CMOD in SE(T) specimen: Application on FCGR of welded tool steel, Acta Metall. Sin. (Engl. Lett.), Vol. 26, No. 1, (2013), pp. 92-96
261 A. T. Jarral M.Ali ,M.H Sahir,R.A Pasha, Design Optimization And Analysis of Vertical Axis Wind Turbine Blade, The Nucleus, Vol. 50, No. 1, (2013), pp. 7-12
262 A. T. Jarral ,R.A Pasha,, Measurement and Supperssion of cutting tool vibration Using Piezoelectric ceramic in ANSYS, The Nucleus, Vol. 50, No. 2, (2013), pp. 149-153
263 A.Hameed, R.A Pasha, A.R. Khan, M.Z.Khan and M.Shah,, To investigate the Effect of heat treatment on fracture toughness of welded joints, The Nucleus, Vol. 50, No. 2, (2013), pp. 165-172
264 Mudassar Ullah, R.A Pasha, R.A.Rahman, W.Asghar, Fatigue Life Estimation of different Welding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32), The Nucleus, Vol. 50, No. 3, (2013), pp.
265 Ambreen Tajammal Jarral, Riffat Asim Pasha, Chatter Measurement on Turning Cutting Tool using Piezoelectric Ceramic Material, Technical journal UET Taxila, Vol. 18, (2013), pp. 60-65
266 Muhammad Anser BASHIR, Hafiz Muhammad ALI, Shahid Khalil, Muzaffar ALI, and Aysha Maryam SIDDIQUI, Comparison of Performance Measurements of Photovoltaic Modules during Winter Months in Taxila, Pakistan, International Journal of Photoenergy, (2014), pp.
267 Ali, H.M, Mahmood, M, Bashir, Muzaffar Ali, M. and Siddiqui, A.M., Outdoor Testing of Photovoltaic Modules during Summer in Taxila, Pakistan, Thermal Science International Scientific Journal, (2014), pp.
268 Muzaffar Ali , Vladimir Vukovic, Nadeem Ahmad,H.M.Ali, Mukhtar Hussain Sahir, Enhancement and integration of desiccant evaporative cooling system model calibrated and validated under transient operating conditions (1), Applied Thermal Engineering, Vol. 75, (2015), pp. 1093-1105
269 Hafiz Muhammad ALI, Muhammad Abdullah ZAFAR, Muhammad Anser BASHIR, Muzaffar ALI and Aysha Maryam SIDDIQUI, Effect Of Dust Deposition on the Performance of Photovoltaic Modules in Taxila, Pakistan, Thermal Science Journal, (2015), pp. 46-46
270 Nadeem Ahmad Sheikh, Sheryar Manzoor, Muzaffar Ali, Variation of Heat Flux at Lower Frequencies of Vibration in a Vibrated Granular Bed, Advances in Condensed Matter Physics, (2015), pp. 6 pages
271 Ali Ahsan, Muzaffar Ali, Hafiz.M.Ali, Tanzeel-Rasheed, M. Adil Qadeer, Sher Asim Khan, Implementation Analysis of ISO 50001:2011 Energy Management System (EnMS) on a Small/Medium Enterprise, Technical Journal (UET Taxila)., Vol. 20, (2015), pp. .72-80.
272 Aysha Maryam SIDDIQUI, Waqas ARSHAD, Hafiz Muhammad ALI, Muzaffar ALI and Muhammad Ali NASIR, Evaluation of Nanofluids Performance for Simulated Microprocessor, Thermal Science Journal, (2015), pp.
273 Omar Khalid, Muzaffar Ali, Nadeem Ahmed Sheikh, Hafiz Muhammad Ali, Muhammad Shehryar Mansoor, Experimental analysis of an improved Maisotsenko cycle design under low Velocity conditions, Applied Thermal Engineering, Vol. 95, (2016), pp. 288–295
274 Muzaffar Ali *, Hafiz.M. Ali, Waqar Moazzam, and M. Babar Saeed, Performance enhancement of PV cells through micro-channel cooling, AIMS Energy, Vol. 3, (2015), pp. 699-710
275 Hafiz Muhammad ALI, M. Zeeshan Muzaffar ALI, Free Convection Condensation on Horizontal Square Wire Wrapped Tubes, International Journal of Heat and Mass Transfer, Vol. 98, (2016), pp. 350–358
276 Hafiz Muhammad ALI, , Arslan Iqbal BHATTI, and Muzaffar ALI, An experimental investigation of performance Of a double pass solar air heater with Thermal storage medium, Thermal Science Journal, Vol. 19, (2015), pp. 1699-1708
277 Usman Ikhtiar, S. Manzoor, N.A. Sheikh, Muzaffar Ali, Free stream flow and forced convection heat transfer around a rotating circular cylinder subjected to a single gust impulse, International Journal of Heat and Mass Transfer, Vol. 99, (2016), pp. 851–861
278 Syed Ihtsham-ul-Haq Gilani, Muhammad Hammad Khan, Muzaffar Ali, Revisiting Fanger’s thermal comfort model using mean blood pressure as a bio-marker: an experimental investigation, Applied Thermal Engineering, Vol. 109, (2016), pp. 35-43
279 Nadeem A. Sheikh, Shehryar Manzoor, Muhammad Mahabat Khan and Muzaffar Ali, Hydrodynamic description of a vibrofluidized granular bed driven at high frequency, The European Physical Journal Applied Physics, Vol. 75, pp.
280 Ali Muzaffar, Sheikh Ahmed Nadeem, Khalid Omar, Manzoor Shehryar, Ali Muhammad Hafiz, Parametric investigation of a counter-flow heat and mass exchanger based on Maisotsenko cycle, Thermal Science Journal, Vol. 296, (2016), pp.
281 Adeel Arshad, Hafiz Muhammad Ali, Muzaffar Ali, Shehryar Manzoor, Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction, Applied Thermal Engineering, Vol. 112, (2017), pp. 143-155
282 M. Kashif Shahzad* , Adeem Zahid, Tanzeel Rashid, Mirza Abdullah Rehan, Muzaffar Ali, Mueen Ahmad, Techno-economic feasibility analysis of a solar-biomass off grid system for the electrification of remote rural areas in Pakistan using HOMER software, International Journal of Renewable Energy, Vol. 106, (2017), pp. 264-273
283 Muzaffar Ali a,?, Sher Asim Khana, Nadeem Ahmed Sheikhb, Syed Ihtsham-ul-haq Gilanic, Muhammad Shehryara, Hafiz Muhammad Ali d, Tanzeel Ur Rashida, Performance analysis of a low capacity solar tower water heating system in climate of Pakistan, Energy and Buildings, Vol. 143, (2017), pp. 84-99
284 Hafiz Muhammad ALI, M. Zeeshan, Muzaffar ALI, Free Convection Condensation on Horizontal Square Wire Wrapped Tubes, International Journal of Heat and Mass Transfer, Vol. 98, (2016), pp. 350–358
285 Hafiz Muhammad ALI,Arslan Iqbal BHATTI, Muzaffar ALI, An experimental investigation of performance Of a double pass solar air heater with Thermal storage medium, Thermal Science, Vol. 19, (2015), pp. 1699-1708
286 Usman Ikhtiar, S. Manzoor, N.A. Sheikh, Muzaffar Ali, Free stream flow and forced convection heat transfer around a rotating circular cylinder subjected to a single gust impulse, International Journal of Heat and Mass Transfer, Vol. 99, (2016), pp. 851–861
287 Syed Ihtsham-ul-Haq Gilani, Muhammad Hammad Khan, Muzaffar Ali, Revisiting Fanger’s thermal comfort model using mean blood pressure as a bio-marker: an experimental investigation, Applied Thermal Engineering, Vol. 109, (2016), pp. 35-43
288 Nadeem A. Sheikh, Shehryar Manzoor, Muhammad Mahabat Khan and Muzaffar Ali, Hydrodynamic description of a vibrofluidized granular bed driven at high frequency, The European Physical Journal Applied Physics, (2016), pp. http://dx.doi.org/10.1051 /epjap/2016160154
289 Ali Muzaffar, Sheikh Ahmed Nadeem, Khalid Omar, Manzoor Shehryar, Ali Muhammad Hafiz, Parametric investigation of a counter-flow heat and mass exchanger based on Maisotsenko cycle, Thermal Science Journal, Vol. 296, (2016), pp. http://doiserbia.nb.rs/ Article.aspx?id=0354
290 Adeel Arshad, Hafiz Muhammad Ali, Muzaffar Ali, Shehryar Manzoor, Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction, Applied Thermal Engineering, Vol. 112, (2017), pp. 143-155
291 Muzaffar Ali, Sher Asim Khan, Nadeem Ahmed Sheikh, Syed Ihtsham-ul-haq Gilani, Muhammad Shehryar, Hafiz Muhammad Ali , Tanzeel Ur Rashid, Performance analysis of a low capacity solar tower water heating system in climate of Pakistan, Energy and Buildings, Vol. 143, (2017), pp. 84–99
292 Muhammad Rizwan Bhatti, Nadeem Ahmed Sheikh, Shehryar Manzoor, Muhammad Mahabat Khan, Muzaffar Ali, Numerical Study of Hydrogen Peroxide Thermal Decomposition in a Shock Tube, Journal of Thermal Science, Vol. 26, (2017), pp. 235-244
293 Najam, Muzaffar Ali et. al, Thermal analysis of a mini solar pound of small surface area while extracting heat from lower convective layer, Thermal science, (2017), pp. 166-166
294 Gulam Qadar, Muzaffar Ali et al, Experimental and model based performance investigation of a solid desiccant wheel dehumidifier in subtropical climate, Thermal Science, (2017), pp. 165-165
295 Khushbakht Rana, Sheryar, Muzaffar Ali et. al, Gust response of a rotating circular cylinder in the vortex suppression regime, International Journal of Heat and Mass Transfer, Vol. 115, (2017), pp. 763-776
296 Khushbakht Rana, Sheryar, Muzaffar Ali et. al, Gust response of a rotating circular cylinder in the vortex suppression regime, International Journal of Heat and Mass Transfer, Vol. 115, (2017), pp. 763-776
297 M.Kashif Shahzad, Muzaffar Ali et. al, Experimental evaluation of a solid desiccant system integrated with cross flow maisotsenko cycle evaporative cooler, Applied Thermal Engineering, Vol. 128, (2017), pp. 1476-1487
298 Saba arif, Muzaffar ali et.al, Performance analysis of different of configuration heating and cooling for a multi-zone building, Int. Journal of Renewable Energy Technology, Vol. 9, (2018), pp. 0
299 Muzaffar Ali,1Muhammad Hasan Iqbal, Nadeem Ahmed Sheikh,Hafiz M. Ali, M. Shehryar Manzoor,Muhammad Mahabat Khan, and Khairul Fikri Tamrin, Performance Investigation of Air Velocity Effects on PV Modules under Controlled Conditions, International Journal of Photoenergy, (2017), pp. Article ID 3829671, https://doi.org/10.1155/
300 Mirza Abdullah Rehan, Muzaffar Ali, Nadeem Ahmed Sheikh, M. Shahid Khalil, Ghulam Qadar Chaudhary, Tanzeel ur Rashid, M. Shehryar, Experimental performance analysis of low concentration ratio solar parabolic trough collectors with nanofluids in winter conditions, Renewable Energy An International Journal, Vol. 118, (2018), pp. 742-751
301 Ghulam Qadar Chaudhary, Rubeena Kousar, Muzaffar Ali, Muhammad Amar, Khuram Parvez Amber, Shabaz Khan Lodhi, Muhammad Rameez ud Din and Allah Dita, Small Size Parabolic Trough Collector System for Solar Dehumidification Application: Design, Development and Potential Assessment, International Journal of Photoenergy, (2018), pp. 0
302 Rabia Hanifa, O.G. Bhatti, M. Ebrahem, S. Manzoor, , , Muzaffar Ali, N.A. Sheikh, Transient fluid flow and heat transfer over a rotating circular cylinder near a wall subject to a single gust impulse, International Journal of Heat and Mass Transfer, Vol. 126, (2018), pp. 1178–1193
303 Ghulam Qadar Chaudhary, Muzaffar Ali, Nadeem Ahmed Sheikh, Syed Ihtsham ul Haq Gilani, Shahab Khushnood, Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling, Applied Thermal Engineering, Vol. 140, (2018), pp. 696–706
304 Muzaffar Ali, Vladimir Vukovic, Hafiz Muhammad Ali, Nadeem Ahmed Sheikh, Performance Analysis of Solar Assisted Desiccant Cooling System Cycles in World Climate Zones, Journal of Solar Energy Engineering, Vol. 140, (2018), pp. 0

To access members area, please Login or Register

Navigation